Feature:
Wireless control, easy to install. Control DC 12V or DC24V Lights, Motors, Fans, electrically operated Doors, Locks, Windows, Blinds, Cars or Other Appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1PX-DC12-ANT2 / S1PX-DC24-ANT2Channel: 1 CHControl Mode: Toggle, Momentary, LatchedCoding Type: Fixed code / learning codeCoding Setting: By learningPower Supply (Operating Voltage): DC12V±1V (S1PX-DC12-ANT2), DC24V±1V (S1PX-DC24-ANT2)Output: DC12V (S1PX-DC12-ANT2), DC24V (S1PX-DC24-ANT2)PCB Size: 74mm x 52mm x 24mmCase Size: 79mm x 58mm x 35mmMaximum Working Current: 30AMaximum Power: 360W/12VDC or 720W/24VDC
External Extend Antenna:
Frequency Range: 300~450MHzImpedance: 50ΩAntenna Length: 15cmCable Length: 150cmWeight: 35gAnti-interference, waterproof, shielded wire set insideMagnetic stand design for easy to install
Transmitter:
Model No.: CB-2Channel: 2 CHRemote Control Distance: 1000m / 3000ft (theoretically)Encode: Fixed code by SolderingUnit size: 135mm x 42mm x 25mmPower Supply: 1 x 6F22-9V battery (Included, useful life 6-12 months)
Usage:
1) Setting control mode Toggle: Only connect Jumper-2.Press button 1: Turn on the relay, terminal OUT output DC power.Press button 1 again: Turn off the relay, terminal OUT no output.2) Setting control mode Momentary: Only connect Jumper-1.Press and hold button 1: Turn on the relay, terminal OUT output DC power.Release button 1: Turn off the relay, terminal OUT no output.3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.Press button 1: Turn on the relay, terminal OUT output DC power.Press button 2: Turn off the relay, terminal OUT no output.Package Include:
1 x Receiver: S1PX-DC12-ANT2 / S1PX-DC24-ANT2 (1 Channel / Three Control Modes)1 x Transmitter: CB-21 x User manual2000 Meters Long Range 1 Channel 30 Amp DC 12V 24V High Power Output Wireless Remote Control Switch 2 Transmitter and Receiver