Resistance Meter Input:either within 0.01-100 Ohm Accuracy:0.3% Auto inspection for qualified products in production line

DR series Digital Resistance Meter  with auto judgement(0.01-100 Ohm) 

The principle:

 When the value of the inspected resistance (Rt for short)is  between the setted high and low limit values under setted  continious sampling times,then the inspected as a qualified products.Otherwise the meter will keep on inspection.When Rt is not between  the setted high and low limit values under NCS times continoius sampling,then the inspected as a unqualified products.The relative relay will output.

Features

 

1, Input:0.01-400Ω,0--50KΩ,others set by user,elctronic Meg Ohm Meter 0-500M can be built when indicated, with NG OK or HI LO GO output control,OK means auto reset,NG means handly reset, high sampling speed, widely used in eletronical production line for control of auto inspection, simple to operate, and practical.

2, Signal input can select data or peak value holding fuction,20 segments non-linearity input, when input 0-5k RTD, it can act as electrical ruler.

3, Output:4 lines output,with various output mode selectable:UPPER/LOW or intevals,etc..

4, Isolate analogue output: 0-10mA or 4-20mA,with output range adjusted by software.

5, RS232 OR RS485 Modbus RTU protocol,connectable with various equipment,computer or PLC directly.

6, Dimemsions: DR4:48*48*80  DR6:48*96*80  DR8:96*48*80  DR7:72*72*100 DR9:96*96*100  DR10:160*80*70,case class:IP65.

7, Power supply:regular:80-265V AC/DC,others: 12--30V AC/DC indicate when ordering.

 

 

 

Main product:

                    Panel Meter

                    Counter

                    Timer,Timer Relay

                    Temperature/Humidity Controller

                    Panel Meterr

                    Frequency / Tacho / Batch / Length /Linespeed Meter

                    Flow / Level /Pressure Controller

                    Proximity Switch

                    Photoelectrical Sensor

                    Sensor Controlle

                    Power Adjustor

  They are widely used in industrial control and measurement field, such as machinery, electrical cabinet, power sub-station, industrial automation, etc..

  Additonally,OEM service,Design service offer, Buyer lable offer.

 

  Tel: 086-0760-23609691          Fax: 086-0760-23609692 

  Phone: 086-13217608016(Barbara Guo)      086-13435730867(Peter Liao)

DR series Digital Resistance Meter with auto judgement(0.01-100 Ohm)