1,low temperature coefficient, high precision, good high frequency performance.
2,Operating ambient temperature: -55 degrees centigrade to +155 degrees centigrade.
3,Film the metal in Vacuum, the surface coats blue resin with the good waterproof.
Test Item | Test Condition | Performance |
Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100 degrees centigrade, calculate per degree centigrade value change rate | 5 ppm-50ppm |
Short time overload | 2.5 x rated voltage or Max. overload voltage(get the lower) for 5 second | R ≤ ± (0.5%R0+0.05Ω) |
Pulse overload | At 4 x rated voltage or Max. pulse overload voltage (get the Lower) cycle 10000±200times (1secondon, 25seconds off) | R ≤ ± (1%R0+0.05Ω) |
Resistance to soldering heat | Immerge into the 350±10 degrees centigrade tin stove for 2-3 seconds | R ≤ ± (0.5%R0+0.05Ω) |
Solder ability | Immerge into the 245±3 degrees centigrade tin stove for 2-3 seconds | The soldering area is over 95% |
Temperature cycling | At -55 degrees centigrade for 30 min, then at +25 degrees centigrade for 10-15min, then at +125 degrees centigrade for 30 min, then at +25 degrees centigrade for 10-15 min., total 5cycles. | R ≤ ± (0.5%R0+0.05Ω) |
Load life in humidity | Overload rated voltage or Max. working voltage(get the lower) for 1000 hours(1.5 hours on and half-hour off) at the 40±2 degrees centigrade and 90-95% relative humidity. | R ≤ ± (2%R0+0.05Ω) |
Load life in heat | Overload rated voltage or Max. working voltage (get the lower) for 1000 hours(1.5 hours on and half-hour off ) at the 70±2 degrees centigrade. | R ≤ ± (2%R0+0.05Ω) |
MELF Resistors