There are three kinds of different table top materials in our factory, introduction as below:
1.MDF partitial board
Characteristic:
1.The surface is hard, inside is particail board, surface cover by one sheet of melamine.
2.If the weather is very damp and wet ,we are not suggest customer not choose this material, because once the water get inside the board then it will be come loose then
2. PVC plywood board
Characteristic:
1. The surface is soft because it cover by one thin sheet of foam and PVC.
2.Inside is solid plywood
3.Damp weather or wet weather no problem if the environmental tempreture not over 60 drgree.
4.But the cigarette butts flammability will distroy the PVC and FOAM on surface.
3.fireproof board:
1.The surface is covered by one sheet of melamine, it's hard.
2.Inside is the lamination plywood ,same as the PVC plywood board.
3.The surface can anti cigarretes bufft flammability ,anti- water,can use in any weather
Leg:
1.0mm or 1.2mm thickness, 30*30mm width iron tube, black powder coated leg, folder legs.
1.MDF partitial board:
2.Fireproof board:
3. PVC plywood board:
2012 folding dining table WG004