LG45 Two-Roller cold rolling mill
1. Main Specification
1.1 Applicable material : Copper tube .
1.2 OD of input tube : Φ30~65mm.
1.3 WT of input tube : Max. 6.0mm.
1.4 Length of input tube : 1.5~6.5mm.
1.5 OD of output tube : Φ20~45mm.
1.6 WT of output tube : 0.5~5.0mm.
1.7 Length of output tube : Upon demand .
1.8 Elongation rate : Max. 8.
1.9 Dia. of Roll : Φ300mm.
1.10 Stroke of stand : 703mm
1.11 Frequency of stroke : 60~90 min-1.
1.12 Feed amount : 2.4~10.3mm
1.13 Rotary angle of input tube : 66.7DEG.
1.14 Main motor power: 75KW, DC, 1000RPM.
1.15 Area Required ~L15.4xW2.5xH1.5m, excluding charging and discharging table.
1.16 Gross Weight : Appro. 25T
1.17 Power Supply : 415V+/-5%, 3-Phase/4-Wire, 50HZ or as your requires.
LG45 Two-Roller cold rolling mill