Fission Type Automatic Transfer Switches YES1-125N 1) Rated current : 16-125A
2) Pole number: 2p, 3p, 4p3) Rated working voltage: AC 240V/415V, 50/60Hz
4)EMC /liife enduring/temperature rising /character and comprehensive testing equipments are configurated to guanrante the product quality.
4)Connection type: Utility-Utility or Utility-Generator.
5)Small volume,the total height is only 110mm.
6)With transfer modes of self-input and self-recover,self-input without self-recover, public power-generator.
7)The intelligent controller is splited and convenient for installation and operation.
8)Serve district:hospital,shoping mall,bank,fire control,ppostal communication,urban rail transportion, high-rise buildings,industrial assembly line,television station,chemical industry,metallurge industry,military and so on places
Introduction
Automatic switch and its corresponding intellectual displayer ,which are mainly used in such sites as high-rise building, post & communication, coal mines, vessels, military establishments,industrial streamlines which need the uninterrupted power. Under the inevitable trend of dramatic increasing demand for municipal power, they can more satisfy the higher requirements for the power utilization reliability.They are designed in a whole compact body, and the electrical-mechanical interlocking ensures that the main backup power supplies cannot be closed simultaneously. The position of both power supplies is in switch-off state designed with the isolation function. The disjunction current is the instant exciting mode.
Quality Control
1)standards:
A)GB/T14048 supercript<high-rise buildings fire norms>,<Architectural Design firenorms>,<Emergency Lighting Design Guide>,<Civil Electrical Design Specification>
B) IEC60947-1/GB/T4048.1< low voltage switchgear and control equipment general>IEC60947-3/GBI4048.3< low voltage switchgear and control equipment ,low voltage switches, disconnector, Switches and electrical fuse combination>
IEC60947-6/GBI14048.11 <low voltage switchgear and control equipment multifunctional transfer switch equipment>
2)All the components are aged and selected strictly, the finished products are continuously aging for 24hours at high temperature condition;
3)EMC /life enduring/temperature rising /character and comprehensive testing equipments are configured to meet relative test and guarantee the product quality.
4)During the production process ,ISO9001 production and management system is strictly carried;
5)CE,CCC are certified.
Parameters
rated current(A) | 40/63/80/100/125 |
working current(A) | 3.5 |
rated tolerance current in short time(KA) | 5 |
mechanical life (times) | 8000 |
electrical life(times) | 3000 |
poles optional | 2/3/4p |
N.W.(KGS) | 4/4.5/5.5 |
working cycle(s/times) | 10 |
Fission Type Automatic Power Changeover Switch