Welcome to ECVERY
Factory direct provide 150Mbps Best 4 ports wifi Broadband ADSL2+ Modem router
Factory direct provide 150Mbps Best 4 ports wifi Broadband ADSL2+ Modem router
Supplier Info
[China Supplier]
Contact Person : Ms. liang Lilian
Tel : 86-755-25321760-804
Fax : 86-755-25321750
Product Detail
ADSL2+ Modem with wireless router ADSL modem, router, firewall and 4 Ports Ethernet in one device Plug and Play ADSL2

150Mbps Best 4 ports ADSL2+ Modem wifi router

-ADSL Compliance 

ANSI T1.413 Issue 2 

ITU G.992.1 Annex A (G.dmt); ITU G.992.1 Annex B (G.dmt) with UR2 compliant 

ITU G.992.2 Annex A (G.lite); ITU G.994.1 (G.hs) 

Support dying gasp 

Maximum Rate: 8 Mbps for downstream and 1 Mbps for upstream 

-ADSL2 Compliance 

ITU G.992.3 Annex A and Annex B (G.dmt.bis) 

Support dying gasp 

Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream 

-ADSL2+ Compliance 

ITU G.992.5 Annex A and Annex B 

Support dying gasp 

Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream 

-Wireless LAN Compliance 

IEEE 802.11g and IEEE 802.11b 

Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for 802.11b 

Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK (2Mbps) for 

802.11b; DBPSK (1 Mbps) for 802.11b 

Operating Frequency: 2.4 ~ 2.5 GHz 

Operating Channels: depending on local regulations. For example, 11Channels(Northern America), 13Channels (Europe), and 14 Channels (Japan) 

Support the selection of best quality channel automatically RF Transmitter 

Output Power (EIP): 13.5 dBm (22mW) for 802.11g, 17.5 dBm (56mW) for 802.11b  

TX Spectrum Mask: comply with IEEE802.11 b/g standard RF Receiver 

Sensitivity: comply with IEEE802.11 b/g standard 

External and internal Antenna: Hardware diversity support 

Coverage Area: 300 meters (LOS) 

Support security standards:

WEP RC4 with 64-bit or 128-bit key length 

WPA/WPA-PSK or MIXED Mode / WPA2/WPA2-PSK or MIXED Mode 802.1x 

Support the Access Control function: only registered WLAN clients are allowed to associate to this 

device. SSID can be hidden for the security issue Two SSIDs are supported. The two wireless 

networks can be configured in different wireless security level. Support the Repeater function to 

extend the coverage area Support wireless user isolation for the hotspot 

-ATM Features 

Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs) 

Support up to 16 PVCs for UBR, CBR, VBR-nrt, VBR-rt with traffic shaping 

RFC2684 LLC Encapsulation and VC Multiplexing over AAL5 

RFC2364 Point-to-Point Protocol (PPP) over AAL5 / RFC2225 Classical IP and ARP over ATM 

RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding) and Client functions 

Support PPPoE, PPPoA, MER and Bridged mode ; OAM F4/F5 End-to-End/Segment Loopback Cells 

-Bridging Features 

Supports self-learning bridge specified in IEEE 802.1d;

Supports up to 4096 learning MAC addresses 

Transparent Bridging 

Transparent Bridging among 10/100 Mb Ethernet, USB and 802.11g wireless LAN 

Supports IGMP Snooping ; Supports 802.1Q VLAN packet pass-through 

-Routing Features 

NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users on the LAN 

to access the Internet for the cost of only one IP address. 

ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, 

Real Player, CuSeeMe, VPN pass

-through with multiple sessions, RTSP, SIP, etc. 

Port Forwarding: the users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on 

user's local network. 

Support DMZ; UPnP IGD (Internet Gateway Device) UPnP extension for NAT traversal capability 

Static routes, RFC1058 RIPv1, and RFC1723 RIPv2 

DNS Relay / Dynamic DNS; DHCP Client/Relay/Server 

Time protocol can be used to get current time from network time server. 

Support IGMP Proxy;Support 802.1Q VLAN Tagging 

Support IP/Bridge QoS for prioritize the transmission of different traffic classes 

Support port mapping function which allows you to as sign all data traffic transmitted among 

specific Internet connections and LAN ports  

HARDWARE -Interface 

One RJ-11 port for PSTN ADSL connection 

Four RJ-45 ports for IEEE 802.3/802.3u 10/100 Base-T auto-sensing and auto crossover Ethernet connection 

One USB client port compliant to USB 1.1 ; IEEE 802.11b/g wireless LAN 

One WLAN On/Off button to enable or disable wireless signal 

One hidden button for restoration of factory default settings 

Wireless USB Modem,  Wireless ADSL Modem,  USB wireless Modem wireless Modem router,  Wireless modem , Modem, wifi Modem, ADSL2+ Modem wireless router,ADSL2+ Modem Router,USB wireless ADSL,

Factory direct provide 150Mbps Best 4 ports wifi Broadband ADSL2+ Modem router

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.