ZISA G3000 G.SHDSL Router
---1 Ethernet Port
Features:1.Rate and Reach Improvements
Supporting dual-channel SHDSL loop, which can offer up to 2.3Mbps (2 wire mode), 4.6Mbps(4 wire mode),can reach customers as far as 20,000 feet from the Telco/PTT office. .
2.CO and CPE mode provided for point-to-point connectivity between two sites
3.2-wire / 4-wire Mode Selectable
2-wire and 4-wire Mode are selectable upon user’s application scenario.
4.Better Power Management
Designed with low-power modes, providing statistical and overall power savings, it reduces the transceiver power consumption according to the line characteristics
Application: Specifications:SHDSL Compliance | ||
Comply to ITU-T G.991.2 (Annex A, Annex B) | ||
G. SHDSL Data Rate: N x 64Kbps (N=0~72 for 4 wire, N=0~36 for 2wire, 0 for adaptive) Impedance: 135 ohms Annex obtained from CPE side, CO side auto adjust Configurable: 2-wire or 4-wire mode Default: 2/4 wire (depending on model), Annex A. Auto-negotiating/Manually-Configurable rate. | ||
ATM Protocols | ||
ATM Cell over SHDSL Up to 8 PVCs OAM F5 AIS/RDI and loopback QoS (min. support of AAL5 CBR) Support OAM F4/F5 AIS/RDI and loopback ITU-T G.991.2 RFC2684 (RFC1483), multi-protocol over ATM RFC2225 (RFC1577), IPoA RFC2364, PPP over ATM (CHAP and PAP supported) RFC2516, PPPoE (PPP over Ethernet) over ATM VC multiplexing and SNAP/LLC | ||
PPP Support | ||
PPP (RFC 1661) PPP over AAL5 (RFC 2364) PPPoE (PPP over Ethernet, RFC 2516) | ||
Bridge Mode | ||
Transparent Bridging (IEEE 802.1D) RFC2684 (RFC1483) Bridged Spanning Tree Protocol (IEEE 802.1D) Supporting IP, IGMP and PPPoE packets filter function IEEE 802.1q VLAN (4 ports only) Port-based VLAN (4 ports only) | ||
Routing Mode | ||
TCP/IP with RIP1, RIP2 or static IP routing NAT/PAT – RFC1631 (basic Firewall support) RFC2684 (RFC1483) Routed DNS Relay and caching (RFC1034/1035) Support IP/TCP/UDP/ARP/ICMP/IGMP protocols IP multicast and IGMP proxy (RFC1112/2236) DHCP server, client and relay (RFC2131/2132) |
G.SHDSL MODEM ZISA SHDSL G3000 ROUTER