High Quality Rubber Lifting Belt Makes less friction coefficient Suitable for running on a machine

Rubber Lifting Belt

Rubber lifting belt is multi-layer silica gel fabric folded with cover rubber outside the belt core. It can be classified in heat-resistant lifting belt and common lifting belt as per application temperature while can be classified in full-cotton, Dacron and cotton, nylon and EP lifting belt as per core material.

It can be divided as type D for heavy-wear, type L for middle-wear and type T for high-temperature material conveyance as per wear and load of material. Wide specification of lifting belt: 150 200 250 300 350 400 500 600mm etc.

Physical property of cover rubber is as below:

Item IndexType D Type LTensile strength Mpa> = 18.0 15.0Tensile yield % > = 400 350Hot-air aging Tensile strength variation% -25-25

Remarks: Physical property of cover rubber will depend on if lift special material or acute wear material.

1.Cover rubber property of heat-resistant belt ( T type) should accord with HG/ T2297 ( heat-resistant belt) standard.2.Longitudinal tensile strength of belt should not lower than nominal value below: 100/ 125 / 160/ 200 / 250/ 315/ 400 / 500N/ mm .3.Tensile yield of belt longitudinal thickness should not lower than 10% and reference elongation should not more than 4% .Minimum of longitudinal test> = 3.85 2.40 2.85100% other synthetic fabrics Average of longitudinal test> = 4.50 3.15 3.50Minimum of longitudinal test> = 3.85 2.40 2.85Cotton canvas Average of longitudinal test> = 3.00 2.20 2.60Minimum of longitudinal test> = 1.95 1.60 1.95Other natural fabric Average of longitudinal test> = 3.15 2.35 2.80Remarks: Bond strength between layers of heat-resistant conveyer belt with fabric core should accord with HG/ T2297 standard.

Rubber Lifting Belt