Specification and technical date of nylon conveyor belt
Fabric type | Fabric structure | Fabric specs | Ply thickness (mm/p) | Strength series(N/mm) | Cover rubber thickness(mm) | Width (mm) | Length (m) | ||||||
Warp | Weft | 2ply | 3ply | 4ply | 5ply | 6ply | Upper | Lower | |||||
Nylon (NN) | Nylon (NN) | Nylon (NN) | NN-100 | 0.75 | 200 | 300 | 400 | 500 | 600 | 1.5~6 | 1.5~4.5 | 400~1800 | <=300 |
NN-150 | 0.80 | 300 | 450 | 600 | 750 | 900 | |||||||
NN-200 | 0.90 | 400 | 600 | 800 | 1000 | 1200 | 500~1800 | ||||||
NN-250 | 1.15 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
NN-300 | 1.25 | 900 | 1200 | 1500 | 1800 | ||||||||
NN-400 | 1.50 | 1600 | 2000 | 2400 | 800~1800 | ||||||||
Nylon conveyor belt physical mechanical properties
Performance level of the cover layer | symbol | The tensile strength shall be no less than | Rate of elongation at break shall be no less than | Abrasion wear mm3 shall be no more than | |
Mpa | Kgf/cm2 | ||||
Heavy; | H | 24 | 240 | 450 | 120 |
Common; | D | 18 | 180 | 400 | 100 |
Light; | L | 15 | 150 | 350 | 200 |
Layer to layer adhesion strength
Indicators | Inter-layers | Inter layer between Cover layer and belt carcass | |
0.8-1.5mm Thickness of cover layer 0.8-1.5mm | >1.5mm Thickness of cover layer more than 1.5mm | ||
Average value of the specimens, N/mm, no less than | 4.5 | 3.2 | 3.5 |
Min. peak value of the specimens, N/mm, no less than | 3.9 | 2.4 | 2.9 |
Nylon Conveyor Belt