Welcome to ECVERY
2012 New Technology and High Oil Yield tyre machine
2012 New Technology and High Oil Yield tyre machine
Supplier Info
[China Supplier]
Contact Person : Ms. Hu Sarah
Tel : 86-373-5939771
Fax : 86-373-5461565
Product Detail
1.use waste tyre as the raw material 2.QC by every worker and engineer 3.professional engineer to install 4.Most suitable

2012 New Technology and High Oil Yield tyre machine The whole pyrolysis system is composed by 13 parts, which are reactor ,transmission device,

catalytic chamber,cooling tube,heavy tank ,oil-water separator,condenser,light oil tank,safety 

device,vacuum system,dedusting system,draft fan,chimmey. 

The keys of pyrolysis machine are reactor and cooling system.

     

    

Reactor directly decides the machine's safety and service life. It is made by welded steel plate. 

So the quality of welding will have a direct impact on safety and service life. Therefore, we use 

automatic welding machine, X-rays detection and heating treatment which will not only guarantee

 the quality of welding but also greatly improve working efficiency.

     For cooling systems, there are two steps. Cooling pipe is the first step. The second is condenser.

 We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one 

small pipe. The heat exchanging area is about 13square meters for one condenser. So the total 

cooling area is 39 square meters, which will guarantee you a high oil yield. 

  vaccum system will guarantee no oil gas leak ,safety ,and environment protection and energy 

saving  and lower the temprature for pyrolysis and save fuel while continous feeding.

the main charater :

 safety:

      1. we using auto welding machine to make the reactor,which can quarrantee the quality of welding seam,avoid cracking and has a long life for about 8 years.

      2. vacuum system to prevent oil gas be back to reactor causing accident.

      3. with professional thermometer , professiona pressure gauge and safety valve.

    

 environment friendly:

      1.dedusting system to prevent gas and dust from coal burning

      2.the exhaust gas will be recycled for heating reactor ,no gas pollution

      3.well sealing on every junction parts to prevent gas leak,no smelly

longer life :

      use Q345R special steel plate ,welding seam with auto welding 

      the life will 8 years

energy saving:

      1. well sealing for heating system ,no gas leak and saving fuel.

      2. the exhaust gas will be recycled for reactor heating . 

2012 New Technology and High Oil Yield tyre machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.