Welcome to ECVERY
used tyre pyrolysis machine
used tyre pyrolysis machine
Supplier Info
[China Supplier]
Contact Person : Ms. Gong Grace
Tel : 86-370-6033919
Fax : 86-370-6033919
Product Detail
Waste tyre&plastic recycling plant 1.Professional manufacture 2.ISO14001:2004 ,ISO9001:2008 and CE 3.Strict quality control

Raw materials can be used:

1. Waste/Used rubber tire

2. Waste industrial mixed plastics, and allow multi-kind flotsams exist at the same time, but PET is an exception.

3. Waste oil: For instance : waste diesel oil, engine oil, and other residue oil.

4. Waste cable skin (first dechlorination treatment will be suggested)     

5. Waste crude oil and so on.   

6. Regeneration of waste PMMA (polymethyl methacrylate)

Characteristics

1. Environmental protection - The production of the plants is carried out in an environment of no smoking and no smell, the production of the device is environmental protective. To refine oil from waste rubber and waste plastics, we turn the rubbish of life into useful oil and carbon black, and help to deal with living organisms, thereby protects the living environment.

2. Safety -The plant has auto alarm system, when there are any problems, the alarming system will let us know in time, and then we can avoid the accidents.

3. Various handling capacity - We can make the plant to handle different quantity of raw materials according to customers’ requirement, ranging from 7tons to 20tons per 24 hours continuously. We are now researching into the new technology; the new device may be able to deal with 50 tons of raw materials per 24 hours.

4.Energy and manpower saving - The plant can use coal as well as electricity as the fuel, when the temperature reaches 150°C, a large amount of gases will be generated, these gases can generate a large quantity of heating energy after being burned fully in the special gas boiler, thus can save energy. There will only need two or three persons to control the whole system, and it is very convenient.

Working process

First, the raw materials are put into the furnace, then seal the feed inlet then the bottom of the reactor will slowly heat the wastes by coal or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 300-400°C; oil steam will flow through light and heavy components separating device; light component will enter the condenser and meanwhile the residues will be discharged automatically in succession. But the liquefied part will be condensed to rubber oil, and the part that cannot be liquefied will be input into heating supply system for burning by way of combustion gas purification system.

used tyre pyrolysis machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.