Ads by Google
The main part of the device:
(1)reactor: Using Q345 boiler steel and the thickness is 16mm.
(2)oil reacting tank:The first step for preciptating.
(3)depositing tank:The second step for preciptating so that the oil gas will be refined.
(4)oil tank:It's used to store the crude oil
(5)cooing pipe:The oil gas will be cooled down and become liquid oil finaly.
(6)gas seperate:The impurities will deposit at the bottom of the gas seperate.
(7)impact deduster collector:The first step to clear the impurities.
(8)water film cyclone:The second step to clear the impurities.
(9)chimney:The smoke without pollutants will release into the air from the chimney.
The technology reference :
| model | material | structure | daily capacity | host speed | working pressure | cooling method | usage fuel | production cycle | electric power | time of a cycle |
| ZL-5000 | Q245&Q345R | horizontal | 5t | 0.4Rev/min | normal | water-cooled | 500kg coal/wood | 20days | 10.75kw | 13-15hours |
| ZL-6000 | Q245&Q345R | horizontal | 8t | 0.4Rev/min | normal | water-cooled | 500kg coal/wood | 20days | 10.75kw | 13-15hours |
| ZL-6600 | Q245&Q345R | horizontal | 10t | 0.4Rev/min | normal | water-cooled | 500kg coal/wood | 20days | 10.75kw | 13-15hours |
A whole batch time
| model | feeding time | processing time | cooling time | discharging time | total time |
| ZL-5000 | 2hours | 6-7hours | 2hours | 2hours | 13hours |
| ZL-6000 | 2hours | 7-8hours | 2hours | 2hours | 14hours |
| ZL-6600 | 2hours | 8-9hours | 2hours | 2hours | 15hours |
The ueage of the final products:
1.crude oil:It's can be used into many industries as follow:
(1)power factory
(2) Chemical factory
(3) Aluminum factory
(4) Boiler factory
(5) central heating factory
2.carbon black:
(1) power factory
(2) Pigment factory
(3) Rubber factory
3.steel wire:It's can be sold to the steel wire and to be reused.
The advantages of our machine:
(1)The material of products use Q345R which garantee the quality and the thicknees is 16mm so that it can extend its service life.
(2)The energy saving is an obvious feature of our device.After two hours' burning you don't have to add any fuel,because the waste gas from the burning will be used to be the new fuel and then you will save your fuels.
(3)Eenvironmental protection is another advantage of our machine.Our machines have two steps to remove dust.The first dust removal equipment is impact deduster collector and the second step to remove dust is to use the water film cyclone.Through this two times dust removal,the clean gas finaly release into the air.
(4)Safety is the most important.In order to ensure the safe operaion ,our device set up safe equipments,such as
alarm, safety valves, thermometer, pressure gauge and safety valve.
Industrial waste treatment
(1).waste gas:The major components of the waste gas is C1-C4.These waste gas will be burned fully though the gas seperate and spray gun. This kind of device not only can eliminent the gas pollution,but also can save fuel.Also through the impact deduster collector,the smoke released into the air can be up to the standard of GB-132812001.
(2)waste liquid: Oil in the process will produce some weak acid wastewater and though adding some weak alkali liquor,it will be neutralized .After neutralization ,let the neutralized water filterd and then use the evaporation of the processor to evaporate the filterd water.
(3)waste solid:After processing,the main waste solid is carbon black.It can be used as material to product industrial carbon black.Also,it can be used as fuel to coal-fired power plants.We adopt the national patent technology to discharge the slag.
Tyre Pyrolysis Machine