Welcome to ECVERY
Rubber cutter XQL-80 product
Rubber cutter XQL-80 product
Supplier Info
[China Supplier]
Contact Person : Mr. Wang Jack
Tel : 86-532-83123378
Fax : 86-532-83123378
Product Detail
We have been in this line for many years with advanced technology and experience.

Worktable size


Motor power


Rated cut-off force


Working oil pressure




Overall size


This bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber. This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.

Rubber cutter XQL-80 product

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.