1,Security alerts.
1),Make it installed before the use of safe
2),Please modify personal codes and master codes
3)Don’t put mechanical emergency key in the safe
2,Main feature.
1),Usage: deposit laptop and other valuables
2),Operation :Micro-motor engine,with code operation
3),Manage:open&close with 3-6 digit personal codes or (and) 6 digit master codes.
4),Safety: wrongly input code by 4 times, hold on 5 minutes.
3,Open and close with code.
(1),close by personal code
Input any 3 ~6 digit code then press the “#” key, “ CLOSED” display , the safe is closed.
(2)open by personal code
Input your 3~6 digit code then “OPENED” display, the safe is opened.
(3)open by master code
Press “#” twice, “ SUPER” display , then input Master code (factory Master code is ”000000”) , “OPENED” display , the safe is opened.
4,Change master code.
Make sure that the safe is opened , and the operation is as follows:
Press "#” twice quickly ,show “PROG”,enter the original master password(factory master code is”000000”),press “#” key,show “CODE” ,input 6 new master password,press “#”,”DONE” , next “new code” finally “GOOD” display, shows it is successful .
5,Change personal code.
1),Input new 3-6 bits personal code.
2)Press “#” , “CLOSE”display , the door is closed.
Attention:
(1) Press “♣” to cancel when code is wrong.
(2) When code is wrongly input, “E-CODE”display , issued a warning buzzer sounds can be re-operation at this time.
(3) wrongly input code by 3 times, “HOLD-5”display ,the safe will be locked for 5 minutes.
(4) Master code is forgotten, please press reset switch on the circuit board to restore factory master code (000000).
Emergency mechanical key:
Turn Mechanical key clockwise, the door is opened , Enter new personal code ,press “#”,close the door,take out the key.
Electronic safe