mining washing plant features: 1. highly purified sand and stone 2. low sand loss 3. fewer malfunctions 4.

General introduction for mining washing plant

Kunding mining washing plant are mainly used in building site, quarry, oil well, glass manufacture, hydro project,etc. Kunding XSD series are produced based on the specific cases of sand-making industry and the advanced technology both at home and abroad. This mining washing plant can clean and separate the dust and powder from the sand efficiently. Compared with the ordinary mining washing plant, XSD series malfunctioned much less.

mining washing plant Operating principle

Having been slowed up by the decelerator, the impeller rotates slowly with the motor. The sand and stone fed into the feeding tank flow into the launder, then roll together with the impeller and grind with each other to get rid of the dust and powder. Water is being added at the same time and the strong water flow washes impurities and light particles in the lauder away. After this process, the clean sand and stone are lift up by blades of the impeller. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the washed sand and stone falls to the discharge chute from the rotary impeller.

Features and advantages of mining washing plant

1. highly purified sand and stone

2. low sand loss

3. fewer malfunctions

4. reasonable structure

5. high capacity and low consumption

Technical parameters mining washing plant:

model	Capacity(t/h)	return sand capacity(t/h)	Power(kw)	Weight(kg)
XSD2000	8-40	3-8	4	1900
XSD2600	20-100	5-15	5.5	3800
XSD2800	50-130	8-70	7.5	4200
XSD3200	240-300	80-130	11	5600
XSD3600	280-500	100-200	15	6800

* The Technical parameters above are only for your reference,any change of model and size of the machine will not be informed .

high efficient XSD2600 mining washing plant