Electro-Welding-Plant:construction panels, manufactured with a 3 dimensional wire strukture in acombination of 2 cover mesh layers interconnected by truss wires, with expanded Polysterene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases: 1.) Production of three-dimensional mesh panels from steel coils by means of a fullyautomatic mesh welder.- Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels- Multiple bending and welding machine to provide flat meshes with threedimensional rods- Horizontal conveyor to transfer meshes toward assembling machine 2.) Assembling of structural panel by means of an automatic line. It consists of following main units:- Assembling system to press three-dimensional frames into polysterene core - Multible welderwith CNC-pitch feeding system to weld together structural panels - Automatic stacking device to eject and pile up finished panel outside the line Electric current: 75kW Max. intermittent welding power: 50 kVaWelding current duty cycle: 5 % Air compressor power: 3m 3/ min o.6MpaWidth of panels: 1200 mm Length of panels: min. 2500 mm, longer panels in steps of 00/40mm Insulation core thickness: 100 – 40 mmCover mesh: 50 x 50 mm openingsWire diameter: f 1.8- f 3.8 mm as standard size proposed for load bearing walls, slabs and roofs. Plain wire quality. Also 2 longitudinal plaster runners as V-stamp of 20 mm.Spacer wires: In tuss configuration at 100 mm or 200 mm spacing. Wire diameter 3.8 mm galvaniced wire quality. Insulation core: EPS, desteny approx. 15 –20 kg/m3 100 mm - 40 mm thickness. | ||
Output speed : Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thuss step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strengsth of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wiresurface, no rust, rease, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating. | ||
Three Dimensional Panel Machine