Ads by Google
DVB standard digital satellite receiver
Outline
JXDH-6002II X integrated receiver decoder is a professional IRD with a variety of input (including DVB over ASI, IP, QPSK, QAM, COFDM and DS3) and output (CVBS, SDI, ASI, DS3 and IP) combinations. An appropriate IP port equipped as an option supports DVB over IP applications. LAN control and monitoring are achieved with TCP/IP, SNMP and HDMS.
Features
1) Fully complies with MPEG-2, MP@ML and DVB-S/-T/-C standards
2) IP input or output with UDP/RTP (optional)
3) Multicast and Unicast on IP
4) Supports PAL, NTSC or SECAM
5) Supports various Conditional Access systems
6) SDI video output with digital audio embedded
7) Two sets of independent ASI outputs
8) Automatic PMT update
9) Compatible with Multiple De-encrypt CI modules
10) DS3 I/O for TS (optional)
11) Switchable audio sound track
12) Teletext VBI, EBU subtitle and DVB subtitle
13) Upgradeable through LAN
Specifications
QPSK Demodulation & FEC Parameters |
|
Input Frequency Range | C & Ku Band, 950~2150 MHz |
Input Level | -25 dBm ~ -65 dBm |
Input Impedance | 75 Ω F type |
Symbol Rate | 2~45 Mb/s (SCPC or MCPC) |
Rolling Off Factory | 0.20 or 0.35 |
Punctured Rates | 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 |
Reeds Salomon Decoding | 204, 188, T = 8 & I=12 |
DVB-C QAM Demodulation |
|
Connector | IEC, Female (7/8 MHz) or F Female (6 MHz) Input |
Input Symbol Rate Range | 1~7 Mbs (PAL), 1~6 Mbps (NTSC) |
Demodulation | 16/32/64/128/256 QAM |
Tuner Bandwidth | 6 MHz or 7 MHz or 8 MHz factory optional |
FEC Decoder | 1/2, 2/3, 3/4, 5/6, 7/8; K=7 |
Frequency Range | 50~860 MHz |
Digital Signal Input Level | -15~15 dBmV |
Input Impedance | 75 Ω F-type |
DVB-T COFDM Demodulation |
|
Connector | IEC, Female (7/8 MHz) or F Female (6 MHz) Input |
1 IF Loop through | Yes |
Frequency Range | 470-862 MHz, 174-230 MHz |
Input Symbol Rate Range | 4.98~31.67 Mbit/s (8 MHz bandwidth) |
Constellation | QPSK, 16-QAM, 64-QAM |
Tuner Bandwidth | 8 MHz |
Digital Signal Input Level | -20 to -75 dBmV |
Input Impedance | 75 Ω unbalanced |
FFT mode | 2K/8K |
Guard Interval | 1/4, 1/8, 1/16, 1/32, off |
FEC Code Rate | 1/2, 2/3, 3/4, 5/6 and 7/8 |
DS3 Input |
|
Input Impedance | 75 Ω |
Connector | BNC |
Maximum Input Code Rate | 44.736 Mbit/s |
Format | Unframed Framing according to G.804/G.752 (DS3) |
DS3 Loop Through Output |
|
Impedance | 75 Ω |
Maximum Output Code Rate | 44.736 Mbit/s |
Connector | BNC |
Format | Unframed Framing according to G.804/G.752 (DS3) |
TS over IP Output |
|
Connector | 100 base-T RJ45 |
Output Bit Rate | 70 Mbits/s Max. |
UDP/RTP | Multicast or Unicast |
Multicast Control Protocol | IGMPV2 |
I/O Interface on back panel |
|
LNB I/O | 1×Input, 1×loop through output |
RS-232 | 1×9-pin D-sub male |
RJ45 | 1×Ethernet control port, 1×TS over IP output (factory optional) |
ASI input | 1 |
ASI output | 2×Redundant output |
SDI output | 1 (optional) |
RGB output | 1×RCA |
CVBS output | 1×RCA, 1×BNC |
Audio XRL Balance Output | 1 |
General |
|
Operating Temperature | 0-45 °C |
Storage Temperature | -20~70 °C |
Humidity | <85% |
Power Supply | AC 90V~260V 50Hz/60Hz |
Dimensions | 483 ×255 ×44 mm |
|
|
multifunctional (support Conax, Cryptoworks, Irdeto ect CA) DVB standard digital satellite receiver