Welcome to ECVERY
Linux WIFI HDMI receiver
Linux WIFI HDMI receiver
Supplier Info
[China Supplier]
Contact Person : Ms. Li Stella
Tel : 86-755-27856629
Fax : 86-755-33803301
Product Detail
Linux WIFI HDMI receiver wifi+hdmi+Ethernet+USB+CA+CI profesional factory SKD service is optional

Linux WIFI HDMI receiver

1, Fully MPEG-2/MPEG-4(H.264/VC-1) and DVB-S/DVB-S2 Compliant2, Multi-media Function (Playback TS, MKV, AVI, DivX, XviD, VOB, RMVB, RM etc.)3, Linux OS Embedded with Powerful compatibility4, Recording&Playback with External Storage Devices(e-SATA / USB2.0 / HDD)5, Support HDMI output (up to 1080i)6, Conax CAS7.0 Embedded7, Ethernet Embedded

TUNERInput Frequency: 950~2150MHzLoop Out Frequency: 950~2150 MHzInput Level: -65~-25 dBmInput Impedance: 75RLNB Power : Auto/14V/18V/OFF, Imax = 350mA

CHANNEL DECODINGWaveform: QPSK, 8PSKRoll Off Factor: 0.2, 0.25, 0.35FEC: QPSK: 1/2, 2/3, 3/4, 5/6, 7/88PSK: 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 Reed Solomon: 204, 188, t = 8Symbol Rate: 2.0~45 MS/s

VIDEO DECODINGFormat: MPEG2/4, H.264, H.263, VC-1, Xvid, DivX, RealvideoAspect Ratio: Supports 14:9, 16:9 image aspect ratios throughPan/scan or letterboxingVideo Resolution: 1080i-50Hz ,1080i-60Hz ,720P-50Hz,720P-60Hz,576P-50Hz,480P-60HzAUDIO DECODING– Program decoding of MPEG-1, MPEG-2,     MPEG-2, MPEG-4,  WMA encoded bit-streams– Decodes MPEG-1 Layer I and II (MUSICAM) ISO 11172– Supports MPEG-1 Layer 3 (MP3) decode– Supports Windows Media Audio v.9 and WMA Pro decoding– Supports sample rates of 11, 16, 22, 24, 32, 44.1, 48kHz– Stereo 24-bit audio DAC for analog audio output– Single program encoded bit-stream output on S/PDIF port

PROCESSOR AND MEMORYCPU: NXP8735Clock Frequency: 320MHzFlash Memory: 64M bytes nand flashDDR1 Memory: 128M bytes

FRONT PANELLED Display: 4 bit LED to indicate channel number and statusKeys: Up, Down, PowerIR Receiver: 38KHzSmart card reader: 1USB2.0 Interface: 1

REAR PANELScart: 1TV Scart(Built-in RS232 Serial Port)Digital Audio Output: S/PDIF (Fiber-optical)HDMI Interface: 1(Output)Ethernet Interface: RJ45Power Switch

RCUCategory: IR(Carrier 38KHz)Battery: 2x1.5V AAA

POWERInput Voltage: AC100~240V 10%, 50/60HzPower Consumption: 25Wmax (Low-power Consumption Optional)

AMBIENTOperation Temperature: 0~40°CSize:260mm(W) x 200mm(D) x 45mm(H)Weight: 1.8Kgs

Linux WIFI HDMI receiver

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.