Ads by Google
Benxi Shuangying New Material Technology Co., Ltd. used of England CAPARO Company’s high alloy spring steel and France ERASTEEL M42 high-speed steel wire as raw materials. We imported the most advanced laser welding production lines and advanced metal strip processing technology from ROFIN Company in Germany, to produce a great variety of steel strips, as well as bi-metal band saw blades.
| CHARACTERISTICS | ADVANTAGES | APPILCATION | ||||||
| Edge material:M42/M51 Backing material:high alloy spring steelLaser weldingTeeth hardness HRC67-69 | High wear resistanceHigh red hardnessTeeth are unbreakableLong service lifeHigh cutting ability and efficiency | High/medium/low carbon steelAlloy steel/ stainless steel The section of various shapes | ||||||
| T=Hook tooth(positive tooth) | ||||||||
| (T)=Strong tooth(with trapezoid shape) | ||||||||
| H=Strong tooth(with turtle-back shape) | ||||||||
| B=Bi-angle tooth(resistance tooth) | ||||||||
| Teeth per inch | Dimensions: width*thickness (mm) | |||||||
| (mm) | 13*0.6 | 19*0.9 | 27*0.9 | 34*1.1 | 41*1.3 | 54*1.6 | 67*1.6 | 80*1.6 |
| 0.75T | Δ | |||||||
| 1.25T | Δ | Δ | Δ | |||||
| 2T | Δ | Δ | Δ | Δ | ||||
| 3T | Δ | Δ | ||||||
| 4T | Δ | Δ | ||||||
| 6T | Δ | |||||||
| 8T | Δ | Δ | ||||||
| 14T | Δ | Δ | ||||||
| 0.75/1.25T | Δ | Δ | ||||||
| 0.9/1.3T | Δ | Δ | ||||||
| 1/1.25T | Δ | Δ | Δ | |||||
| 1.4/2T | Δ | Δ | ||||||
| 2/3T | Δ | Δ | Δ | Δ | Δ | |||
| 3/4T | Δ | Δ | Δ | Δ | Δ | Δ | ||
| 4/6T | Δ | Δ | Δ | Δ | Δ | Δ | ||
| 5/8T | Δ | Δ | ||||||
| 6/10T | Δ | Δ | ||||||
| 8/12T | Δ | Δ | Δ | |||||
| 10/14T | Δ | Δ | Δ | |||||
| 3/4(T) | Δ | Δ | Δ | Δ | Δ | |||
| 4/6(T) | Δ | Δ | Δ | Δ | Δ | |||
| 2/3H | Δ | Δ | Δ | |||||
| 3/4H | Δ | Δ | Δ | |||||
| 4/6H | Δ | Δ | ||||||
| 3/4B | Δ | |||||||
T=Hook tooth(positive tooth): The hook tooth with a positive rake angle can be used for all types of steel, especially for long-chip and hard-to-cut materials, for example construction steel and hardened steel, as well as high alloy materials.
(T)=Strong tooth(with trapezoid shape): It suitable for cutting many kinds of composite hardness and high plastic materials as well as pipes,thin-plates and special shaped cross sections.
H=Strong tooth(with turtle-back shape) :The strong tooth with turtle back is suitable for cutting solid and thick wall pipe materials, as well as all kinds of high alloy content and viscous materials.
B=Bi-angle tooth(resistance tooth) :Bi-angle tooth enhance the hardness of the tooth, and the intensity of the tooth is better than the normal tooth. It is suitable for cutting solid material, thick-wall pipe and all higher alloy content material.
N=Normal tooth(standard tooth 0 angle) : The normal tooth is best suited for the sawing of materials with high carbon content, such as tool steel or cast iron with short chips. It is suitable for a wide range of applications, including thin crosscuts and materials with thin-walled cross sections.
Bi-metal band saw blade