Product detail:
1.Galvanized scaffolding metal deck plank for sale
2.Material:Q195-Q235
3.Surface treat:hot-dipped galvanised
4.Width:210,225,240,250,420,480,500mm
5.Thickness: 1.0-2.0mm
6.Length: To be produced as per your requirement
7.Folding box should be more stronger
8.Patent holes design to be reduced products' weight
9.Patent ribs make products stronger and drain the water providing any rain days
10.Life time:5 years guarantee
Dimension:
Item | Wide (mm) | Height (mm) | Thickness (mm) | Length (m) | Folding Box | support bracket | Weight (kg) |
KH-SW-240-001 | 240 | 45 | 1.1 | 1.0 | Normal | flat support | 3.64 |
KH-SW-240-002 | 240 | 45 | 1.1 | 1.5 | Normal | flat support | 5.32 |
KH-SW-240-003 | 240 | 45 | 1.1 | 2.0 | Normal | flat support | 6.99 |
KH-SW-240-004 | 240 | 45 | 1.1 | 2.5 | Normal | flat support | 8.66 |
KH-SW-240-005 | 240 | 45 | 1.1 | 3.0 | Normal | flat support | 10.33 |
KH-SW-240-006 | 240 | 45 | 1.1 | 4.0 | Normal | flat support | 13.68 |
KH-SW-240-007 | 240 | 45 | 1.1 | 1.0 | Normal | rectangular support | 3.74 |
KH-SW-240-008 | 240 | 45 | 1.1 | 1.5 | Normal | rectangular support | 5.52 |
KH-SW-240-009 | 240 | 45 | 1.1 | 2.0 | Normal | rectangular support | 7.29 |
KH-SW-240-010 | 240 | 45 | 1.1 | 2.5 | Normal | rectangular support | 9.06 |
KH-SW-240-011 | 240 | 45 | 1.1 | 3.0 | Normal | rectangular support | 10.83 |
KH-SW-240-012 | 240 | 45 | 1.1 | 4.0 | Normal | rectangular support | 14.38 |
KH-SW-240-013 | 240 | 45 | 1.1 | 1.0 | Normal | trapezoid support | 3.71 |
KH-SW-240-014 | 240 | 45 | 1.1 | 1.5 | Normal | trapezoid support | 5.46 |
KH-SW-240-015 | 240 | 45 | 1.1 | 2.0 | Normal | trapezoid support | 7.20 |
KH-SW-240-016 | 240 | 45 | 1.1 | 2.5 | Normal | trapezoid support | 8.94 |
KH-SW-240-017 | 240 | 45 | 1.1 | 3.0 | Normal | trapezoid support | 10.68 |
KH-SW-240-018 | 240 | 45 | 1.1 | 4.0 | Normal | trapezoid support | 14.17 |
KH-SW-240-019 | 240 | 45 | 1.1 | 1.0 | Equilateral | flat support | 3.65 |
KH-SW-240-020 | 240 | 45 | 1.1 | 1.5 | Equilateral | flat support | 5.32 |
KH-SW-240-021 | 240 | 45 | 1.1 | 2.0 | Equilateral | flat support | 6.99 |
KH-SW-240-022 | 240 | 45 | 1.1 | 2.5 | Equilateral | flat support | 8.66 |
KH-SW-240-023 | 240 | 45 | 1.1 | 3.0 | Equilateral | flat support | |
KH-SW-240-024 | 240 | 45 | 1.1 | 4.0 | Equilateral | flat support | 13.68 |
KH-SW-240-025 | 240 | 45 | 1.1 | 1.0 | Equilateral | rectangular support | 3.75 |
KH-SW-240-026 | 240 | 45 | 1.1 | 1.5 | Equilateral | rectangular support | 5.52 |
KH-SW-240-027 | 240 | 45 | 1.1 | 2.0 | Equilateral | rectangular support | 7.29 |
KH-SW-240-028 | 240 | 45 | 1.1 | 2.5 | Equilateral | rectangular support | 9.06 |
KH-SW-240-029 | 240 | 45 | 1.1 | 3.0 | Equilateral | rectangular support | 10.83 |
KH-SW-240-030 | 240 | 45 | 1.1 | 4.0 | Equilateral | rectangular support | 14.38 |
KH-SW-240-031 | 240 | 45 | 1.1 | 1.0 | Equilateral | trapezoid support | 3.71 |
KH-SW-240-032 | 240 | 45 | 1.1 | 1.5 | Equilateral | trapezoid support | 5.46 |
KH-SW-240-033 | 240 | 45 | 1.1 | 2.0 | Equilateral | trapezoid support | 7.20 |
KH-SW-240-034 | 240 | 45 | 1.1 | 2.5 | Equilateral | trapezoid support | 8.94 |
KH-SW-240-035 | 240 | 45 | 1.1 | 3.0 | Equilateral | trapezoid support | 10.57 |
KH-SW-240-036 | 240 | 45 | 1.1 | 4.0 | Equilateral | trapezoid support | 13.84 |
KH-SW-240-037 | 240 | 45 | 1.0 | 1.0 | Normal | flat support | 3.57 |
KH-SW-240-038 | 240 | 45 | 1.0 | 2.0 | Normal | flat support | 6.53 |
KH-SW-240-039 | 240 | 45 | 1.0 | 3.0 | Normal | flat support | 9.50 |
KH-SW-240-040 | 240 | 45 | 1.0 | 4.0 | Normal | flat support | 12.47 |
KH-SW-240-041 | 240 | 45 | 1.0 | 1.0 | Normal | trapezoid support | 3.75 |
KH-SW-240-042 | 240 | 45 | 1.0 | 2.0 | Normal | trapezoid support | 6.71 |
KH-SW-240-043 | 240 | 45 | 1.0 | 3.0 | Normal | trapezoid support | 9.68 |
KH-SW-240-044 | 240 | 45 | 1.0 | 4.0 | Normal | trapezoid support | 12.65 |
KH-SW-240-045 | 240 | 45 | 1.2 | 1.0 | Normal | rectangular support | 4.16 |
KH-SW-240-046 | 240 | 45 | 1.2 | 2.0 | Normal | rectangular support | 7.72 |
KH-SW-240-047 | 240 | 45 | 1.2 | 3.0 | Normal | rectangular support | 11.28 |
KH-SW-240-048 | 240 | 45 | 1.2 | 4.0 | Normal | rectangular support | 14.84 |
Features:
1. The Pierced Steel Plank(PSP)is strong, light, simple, fool proof, safe and inexpensive.
2. It is so simple that it can be laid on any fairly level piece of land with a few days work.
3. It is so foolproof that if some parts are lost, it will still be useful. It must be safe for
any type of construction, under any weather conditions.
4. It is be so light that it can be transported swiftly and easily to any spot
5. The PSP(Piereced Steel Plank) was designed with holes to reduce the weight,
improve traction and facilitate drainage. Flanging the holes kept the mat durable
by compensating for the strength lost by removing a portion of the metal
Wide variety of consumers:
1. Temporary and permanent aircraft landing fields or runways
2. Temporary roadways or access routes for trucks, heavy equipment, backhoes, concrete trucks, tree trimmers and cranes.
3. Construction Sites
4. Helicopter Landing Pads
5. Irrigation Tracks
6. Launches and boat ramp extensions
7. Corrals and chutes for livestock
8. Warehouse flooring 9. Mobile home moving
10. RV tracks or storage areas
11. Storage platforms for heavy equipment, supplies or runways.
How to extend scaffolding walking Board
1.Have a 'competent person' assess and document the needs of the area for extended
scaffolding. A 'competent person' in some states is required to have special licensing,
and in others experience with scaffolding set up is enough. What is important is that
you keep some form of documentation that the person designated as 'competent'
approves each step of the scaffolding assembly
2.Assemble the frame of your scaffolding system. Whether it is mobile or stationary,
make sure that the supports for your scaffolding plans follow the assembly plans
3.Lay your first plank across the supports of your platform. Have your competent
person check that each plan extends a minimum of 6 inches and a maximum of
12 inches past any support bracket.
4.Extend your scaffolding plank by laying the next plank over it. If the span
of your support is 7 feet, your plans must overlap a minimum of 6 inches up
to a maximum of 12 inches. If the span of your plank support is 10 feet, the boards
must overlap 12 inches.
5.You may provide cleats to additionally connect your extended scaffold planks again.
Ask your competent person to designate that the cleats are provided and used only
to prevent the scaffold planks from sliding and not as a means of providing any
re-enforcement to the boards at all.
How to Assemble Scaffolding
1. Check the area where you will build your scaffolding, before assembly. The ground should be level and free from any moisture that may cause the assembly to slip. Check to make sure there are no obstacles in the area that will interfere with the scaffolding and look for places that you can easily and safely secure tie-ins
2. Put 1 by 1 foot pads under the scaffolding feet if the ground is soft or sandy. This option is better than using a large piece of plywood, which will shake if the ground isn't perfectly level. Screw leveling pads are available as scaffolding supports, however they are not necessary. Casters also work to level the scaffolding, but you should only use casters on hard surfaces
3. Have someone help you assemble the scaffolding. One person should work to build the frame, while the other person passes all of the required materials to them. The person working to assemble the scaffold should wear a safety harness at all times
4. Inspect all of the scaffolding pieces for damage during assembly. Never use damaged, rusted or misshapen parts. Secure the scaffolding to surrounding structures with tie-ins as you go along. Double-check the locking components, at every stage, to make sure that they are coping with the added strain
5. Use ladders to reach the elevated sections. Ladders can be helpful when connecting platforms to the scaffold, however, if the scaffold will be standing for a long period, you should add a scaffold stairway
6. Make the scaffolding more rigid by adding extra diagonal bracing which pulls sections tighter against existing bracing. Tensioned rope or piping works nicely
7. Add your scaffold platforms by using 2-inch planks, or double up two sheets of 1-inch plywood. Always take extra care to not overload the deck with equipment
Tips & Warnings
1. Always use components from the same manufacturer.
2.Standard top safety rails are only for safety, and not for rigging. If you need to add a rail for rigging, you can build your own by splicing pipe onto the risers, but use very strong connectors for assembly, such as three way crosses or ladder chain with bolts
Galvanized scaffolding metal deck plank for sale