scan and store your document directly to your memory card or flash disk without connecting the scanner to any computer

Description:

*With this scanner, you can scan and store your document directly to your memory card or flash disk without connecting the scanner to any computer. 

*If you wish to store your document directly into your computer, just plug in a USB cable and/or use the supplied Scan to PC utility. 

*Before you install and operate the product, please take a few minutes to read through the user’s manual. It provides proper instructions for you to install, operate and maintain the product.

Specification:*Scanning Technology: CIS (Contact Image Sensor) *Acceptable paper size: 2”x 2” ~ 8.4” x 11.8” *Output image formats: JPEG, PDF *Flash: 512KB*Internal: 64MB (DDRI) *Resolution: Scanned image: 300 dpi (dots per inch) *Scan color depth: Color – 48 bit *Output format: Color – 24 bit (JPEG) *Memory Cards: SD/SDHC/Flash Disc *Interfaces: Mini USB port compatible with the USB 2.0 / 1.1 Device specification *USB Mass Storage Supported: Windows XP/Vista/7, Mac OS 10.5.x *Power Input: 100-240W *Power Output: 5Vdc, 2.0A *Battery Durability: 250 pages (A4, color) *Weight: 700 g *Dimensions: 290mm * 68mm * 51 mm (11.4in * 2.7in * 2.0 in) *Paper Thickness (g/m² or lb): 34~127 g/m² (9 to 34 lb) up to 0.5mm *Recommended Operating Environment: 15ºC~35ºC(59ºF~95ºF); 20% RH~70% RH

Package:1.  Scanner 2.  CD (Scan to PC Manager, User’s Guide) 3.  Calibration Chart 4.  Cleaning Swab 5.  USB Y Cable

System Requirements *IBM compatible PC 586, Pentium or higher *Microsoft Windows XP, Windows Vista/Windows 7 *At least 100 MB of free hard disk space (500 MB is recommended) *At least 128 MB of system memory (512 MB of RAM is recommended)  *At least 1 GB of RAM for Windows Vista/7 *USB port 2.0 (compatible with USB 1.0)

Frequently asked questions 1. Question: There are strange lines on the scanned image, or the image is not clear. Answer: Check the following: Are there scratches on the original, or is the original clean? Remove any stains or dust from the original before scanning. Has the scanner been used for a long period of time without cleaning and calibration? Clean it 2. Question: The original gets stuck halfway in the feeding slot. Answer: Press the Function button. The scanner will back out the original so you can remove the jammed original from the output slot.  3. Question: The System LED blinks rapidly and no scan is possible. Answer: Check the following: Is the memory card inserted properly into the memory card slot? Re-insert the card and try again. Is the SD card locked (set to write-protect)? Unlock the card. Is the memory card full? The indicator blinks when the free space on the memory card is below 1MB. Use another card if necessary. Make sure the memory cards are in FAT or FAT32 file formats only, not NTFS or any other file format. Did you insert the next original before the scanning process of the previous one was completed? Power the scanner off and back on and try again. Make sure that you scan the next original only after the scanning process of the previous one has completed. 4. Question: The scanner feels warm to touch. Answer: It is normal for the scanner to emit a small amount of heat (around 30-45 Celsius) after prolonged use. However, if there are strange odors coming from the scanner or the scanner feels hot to the touch, disconnect the scanner immediately from the power supply or the computer.

Drop shipping Portable Scanner Cordless Mini Portable Scanner A4