*Screen is seen from the front but is dark when viewed from the side from an angle of more than 30 degrees due to the optical polarization filter

 *Prevents reflections

 *Protection from scratching

 *Silicone coating – No Glue required

*Thickness: 0.35 mm

* Mirror screen protector looks and works like a mirror when the screen is shut off

 *Once the screen is activated, the screen contents appear like normal

 * UV protection and color improvement

 * Dust repelling

 * Anti-scratch

 * Touch screen recognition improvement

 * Washable and reusable

 * No sticky residue

 Step 1 Check Film Size   Clean both hands and lcd screen and adjust the location where the film would be on the lcd procedure (Please arrange the film to the center of lcd before you take off all vinyl out of the hard film )

Step 2. Clean LCD    Clean the LCD with cleaner and micro fiber cloth included. If there is a dust left on the lcd, that can cause a bubble. Apply cleaner on the cloth ,not on lcd.

Step3. Film Installtion    Take off 1/3 of back PET and begin to apply it on the area you desire on lcd. Take off the rest of back PET as your fully attach the film. Result may vary upon installation.

Step 4,Remove bubble with a Squeeze    Remove bubbles by using squeeze included with the film, If you see bubbles after installation, lift up with film with a tape and re-attach it or slide the bubble to the sides very slowly and carefully with a squeeze. 

Below  10000pcs  : within 3days 

 10001 pcs ~~~50000 pcs : Within   4days

50001 pcs ~~~200000pcs   :  Within   7days

 Custerms  packaging   the deliever time is within  7--10days