Ads by Google
Carbide drawing dies:
C/O available
different size and design are available
custom made as the specified requirements and drawings
carbide drawing die
(Unit:mm)
Head dies | Size | ||
d | D | H | |
Flat head | 0.5-60 | 7.0-86 | 8.0-90 |
Sinking head | 2.0-32 | 10-70 | 7.5-86 |
(Unit:mm)
In-out rod mould | Size | |||
s/d | D | H | α° | |
Quadrate | 6.1-42 | 28-100 | 12-25 | 30-80 |
Hexagon | 3.5-45 | 16-90 | 10-60 | 30-90 |
Round | 2.0-32 | 10-70 | 10-56 | 10-50 |
(Unit:mm)
Three times Head forging mould | Size | |||
d | d 1 | D | H | |
0.5-10 | 2.0-15 | 22-45 | 10-90 | |
Cemented carbide drawing die
wire type stretching die
Type | Dimensions (mm) | |||||
D | d | H | α | β | γ | |
01 | 6~8 | 0.2 | 4~6 | 10° | 40° | 60° |
10 | 6~8 | 0.4~0.8 | 4~6 | 40° | - | |
11 | 8~22 | 0.4~5.7 | 6~20 | 10°~40° | 40° | |
12 | 8~26 | 0.4~8.0 | 6~16 | 16° | 40° | |
13 | 30~140 | 3.7~84 | 21~50 | 14°~20° | - | |
Grade | Equal to ISO Category Number | Performance | ||
Density | Bend Strength | Hardness | ||
G/Cm3 | N/mm2 | HRA | ||
YG3 | K01 | 14.9-15.3 | 1180 | ≥90.5 |
YG3X | K01 | 15.1-15.4 | ≥1300 | ≥91.5 |
YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 |
YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 |
YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 |
YG8 | K20-K30 | 14.6-14.9 | ≥1840 | ≥89 |
tungsten carbide shaft sleeves