open PLC straight-seam welding equipment
Product introduction
The series of Open type automatic TIG welding machine can can implement automatic welding of metal materials such as stainless steel, cold rolled sheets, aluminum and so on. This equipment is without deformation during working , without grain boundary corrosion, high welding speed, good quality and high degree of automation. It is also the ideal special equipment of welding for the industry of solar water heater, electric water heater, stainless steel products, metal bellows, etc.
Product features
Equipment is made of steel plate, special steel and other materials after heat treatment and machining process, etc.The workpiece is placed in the position of welded parts using a cantilever device. It should use some pressing and lifting devices made of excellent quality steel to be welded sheet positioning in the mouth of the welding. Then, cylinder of finished can take out after opening the locking device, and it is easy to operation.Welding travel carriage parts: use 110V DC 24W permanent magnet servo motor as the tool of driven. By the two stage turbine vortex rod can reduce speed to obtain a smooth and continuously adjustable speed. The car can drive a TIG torch for uniform linear motion. Before the formal welding, the welding torch and welding seam keep parallel, consistent with the level (can adjustable “adjusting bolt”, carefully corrected, and tighten the rail).The cantilever device is a essential part of whole Open type automatic TIG welding machine, it can ensure the stability of the welding work process, and it constitutes a unified whole.Technical specification
Model specification | Rated voltage | The power rating | Welding speed | Compressed air |
L1600/L2000/L2500/L3000/L3200mm | 380V | 18KW/24.1KW | Stepless continuous adjustable | 0.45Mpa |
open PLC straight-seam welding equipment