Welcome to ECVERY
Welding Seam Tracking System for Tube Plate Welding YXAWST-150L
Welding Seam Tracking System for Tube Plate Welding YXAWST-150L
Supplier Info
[China Supplier]
Contact Person : Ms. jin tina
Tel : 86-25-52289642
Fax : 86-25-52289642
Product Detail
1. Laser sensor target&follow welding seam strictly if the seam is long and curving 2.Not effected by out welding arc or spatte

 Functions

When the welding seam is long, not straight, or spiral, our machine can control welding torch move along welding seam direction strictly, thus saving cost, improving welding efficiency, ensuring machining precision, and achieving good internal quality and nice appearance.

YXAWST-150L

Instructions

- The Laser Seam Tracker consists of a precision laser sensor, controller and slide. The sensor does probe the weld seam and the controller does control the change value on the work-piece. The welding torch is guided rapidly and exactly by moving the slides.

- Non-contact laser sensor makes detect position nearer to welding point, thereby dramatically reduce tracking delay and have a higher tracking accuracy.

- The Seam Tracker can calibrate the error caused by the work-piece deformed itself and the welding heat.

- The electric motors have dual-production under overcurrent and overvoltage, which can improve motor performance and life;

- Dustproof design can effectively prevent tracker inside from welding spatter and dust;

- Source voltage inputted at wide range, which is suitable for various countries;

- The Seam Tracker can be compatible used with other automatic system or unmanned system.

 Features

-- The differences among YXAWST-100L, 150L, and 200L Laser Welding Seam Trackers are Rated Loading Capacity and Welding Application as below specification.

-- The Seam Tracker has the function for sensing the track welding.

-- Support near/remote operating.

-- Several ways of enter into welding seam.

-- There is the function to make the time of weld end programmed because the tracker can sense the edge of work-piece.

-- Double-model control in manual and automatic.

-- The tracker has the right/left reverse function for easy installation and change welding direction.

-- The tracker can effectively identify and filter the welding spatter.

Specification

Model

YXAWST-150L

Rated Loading Capacity

50kg

Tacking Range

150mm

Maximum Tracking Speed

350mm/min

Accuracy

±0.2mm

Application Welding

SUBMERGED

Driving Motor

High-Quality DC Motor

Driving Method

Motor Drive→Reducer→Ball Screw→Seam Tracker

Input Power

AC100~240V Single-Phase,50/60HZ,2A

Standard Configuration

Controller + X/Y Sliding Plate + Sensor + Sensor Adjust + Connecting Cables

Accessories Option

Remote Control Box

Remark: We can also make seam tracker in special specification for user demands.

Welding Seam Tracking System for Tube Plate Welding YXAWST-150L

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.