Motion Sensor Switch -Angle:120/360 -Detection distance:3-5m -Adjustable illuminance:3-2000LUX -Adjustable Time:10-120S

Motion Sensor Switch

Time and Ambient light is adjustable,it satisfied customer. 

♦Technique Parameter

Model No.	SA168-3
Diameter	Ø42*H80MM
Detection Angle	120/360
Detection Distance	3-5m
Work Voltage	AC220V 50HZ/110V 60HZ
Max. Loads	600W
Work Temperature	-15°C~+50°C
Work Humidity	≤93%RH
Adjustable Time	10~120s
Adjustable Illuminance	3~2000LUX

                  

♦The Principle

This sensor fitting is an energy-saving and automatic passive infrared sensor switch which adopts infrared detector,IC and SMD technology.The sensor is designed to be maximally sensitive to motion objects that emit heat energy at the wavelength emitted by human body.The infrared sensor light will be switched on or off automatically when the sensor detect or not the motion heat energy in their“field of view”.

                

♦Feature 

Ambient light level is adjustable:When turn the LUXknob clockwise maximally,the sensor light can work at any light level;When turn the knob anticlockwise maximally,the sensor light can work ONLY under 3LUX light level.

Time delay is adjustable:When turn the TIME knob clockwise maximally,the time delay is approx 90-120 seconds.When turn the TIME knob anticlockwise maximally,the time delay is approx 8-12 seconds.

♦Important1)Disconnect the power supply before any work on the sensor switch fixture.2)Install the sensot switch by a qualified electrician or experienced man.3)Avoid mounting the sensor switch directly above heat sources such as air conditioner and boiler flues or exposed to direct sunlight.4)Install the sensor switch at position with vibration free mounting.5)The most reliable way of detecting motion is obtained when the sensor switch is mounted laterally to the walking direction and no obstacles(such as partition and wall) obstruct the line of sensor vision.6)Suitable for indoor use ONLY.

♦Wiring Diagram

        

PIR Motion Sensor Switch