Diesel disk separator 1.SS solid bowl 2.Single &Whole unit 3.CCS certificate 4.Self cleaning and high cost performance

Diesel disc separator 

Model PDSD separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.        

    

The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.   

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully. 

The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.

Disc centrifuge, disc separator -Whole unit

With heater,pumps,valves,frames ,control panel etc.

 

     

Main Technical Specification

Condition for mineral oil separation and actual capacity (refer to the chart)

oil types	heavy diesel oil						lubrication oil
							SAE30,  40	detergence oil	steam turbine oil
kinematical viscosity(mm2/s)	13	20.5		36.2		80	100-120		61.2-74.8
	50°C						40°C		40°C
density/(kg/m3)(20°C)	less than       900				900-991		880-900		less than900
separating temperature (°C)	40		60		80		80-95
recommended capcity (L/h)	900-5000						300-4500

 

oil types	Fuel oil
	Fuel oil		Heavy fuel oil
kinematical viscosity(mm2/s)	1.9-5.5	5.5-24	120	180	380
	40°C		50°C
density/(kg/m3)(20°C)	less than 900		900-991
separating temperature (°C)	Normal temperature,40-60degree best		90-98
recommended capacity (L/h)	From 650L/H to 5000L/H depends on different oil and working temperature.

Note:Refer to the aboved chart ,we will provide suitable capacity separator.

Diesel disc separator