1. product name: oil gas water three phase separator
2. fluid handled: oil, gas and water
3. design pressure: 1415psig
4. operating pressure: 750-1200psig
5. gas flow rate: 60mmscfd
6. oil flow rate: 20000bpd
7. water flow rate: 3000bpd
8. standard: ASME Boiler and Pressure Vessels Code
Function of three phase separator
Oil gas water three-phase separator: When Oil and gas flow from Wells after the entry of separator get into the separator, Oil and gas flow pass the absorb energy device of separation, and finish the first separation. After the first phase separation ,the Oil and gas flow get buffer again through the corrugating plate, further removed the fog from the airflow, So that residual droplet were removed.The Separated gas released from tanks in through the gas exports after catching the vortex air regulator,and get into vent pipe Through measuring stomatal board device and pneumatic – valve.After liquid enter the mixing chamber, rely on gravity separation principle, make oil natural in liquid, and the water in liquid bottom, after the Oil get into oil chamber through the internal clapboard of the separator, finish the three-phase separation. The bottom of the Separator has export of oil and water respectively, and enter into respective process through the oil-water measurement.
Technical Data
No. | Type | Working pressure | Diameter | Gas productivity(max) | Liquid productivity(max) |
1 | WS1*3.5 | 9.8MPa | φ1000 | 1 million m3/d | 1000m3/d |
2 | WS1.2*4 | 9.8MPa | φ1200 | 1.6 million m3/d | 1200m3/d |
3 | WS1*3.5 | 6.3MPa | φ1000 | 1 million m3/d | 800m3/d |
4 | WS0.8*3.5 | 9.8MPa | φ800 | 0.5 million m3/d | 600m3/d |
Picture of our Factory(Working site)
ASME oil gas water three phase separator