Welcome to ECVERY
Tubular Evaporator(forced Circulation evaporator)
Tubular Evaporator(forced Circulation evaporator)
Supplier Info
[China Supplier]
Contact Person : Ms. Wu Ailsa
Tel : 86-577-86896444
Fax : 86-577-86896444
Product Detail
Tubular Evaporator's feature: 1.easy operation 2.PLC 3.Level control automatically 4.Recycling of steam Tubular Evaporator consists of one or more vertical tubular heat exchangers with vapour separator, condenser and pumps. ProcessEvaporation takes place under vacuum, atmospheric pressure, positive, or a combination depending on product heat sensitivity and viscosity. Usually, vacuum is involved.The process liquor to be evaporated is distributed uniformly as a film along the inside of the heat exchanger tubes. Steam (or vapour) is applied on the heating media side of the tubes in an amount suitable for the required evaporation.Heat is transferred through the tube wall to the liquor, which starts boiling at a temperature corresponding to the pressure inside the tubes.The concentrate and vapour flow from the bottom of the tubes to a separator, where they are separated. The concentrate is pumped out from the bottom of the separator, while vapour is condensed in a condenser or in the next stage.Falling Film Tubular Evaporators are available in single-stage or multi-stage options. Multi-stage evaporation is generally most cost-effective as reuse of vapour from the previous stage into the next enables recovery of residual heat as the heating medium.Operating costs can also be reduced by using a thermal vapour recompressor (TVR) or a mechanical vapour recompressor (MVR), or a combination of both.

Tubular Evaporator(forced Circulation evaporator)

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.