Ads by Google
KL-205 Suction Accumulator
Type | Connection ODF only (in) | A(mm) | B(mm) | C(mm) | R-12(400F) | R-22/134a(400f) | R-404a/507(400F) |
KL-204 | 1/2" | 102 | 260 | 45 | 3.5 | 3.3 | 3.4 |
KL-205 | 5/8" | 102 | 260 | 50 | 4.4 | 4.0 | 4.2 |
KL-206 | 3/4" | 139 | 305 | 75 | 6.1 | 6.8 | 6.2 |
KL-207 | 7/8" | 139 | 305 | 75 | 9.8 | 9.0 | 9.3 |
KL-208 | 1-1/8" | 159 | 375 | 90 | 14.2 | 13.3 | 13.7 |
KL-209 | 1-3/8" | 159 | 510 | 90 | 21.8 | 20.5 | 21.2 |
KL-210 | 1-5/8" | 159 | 560 | 90 | 23.8 | 22.5 | 23.1 |
KL-2117 | 2-1/8" | 219 | 505 | 110 | 36.9 | 29.8 | 30.7 |
The Suction Accumulator is designed with internal bend pipes to prevent internal splashing and help the aggregation of the oil at the bottom of the separator.The separator shall be installed as nearer to the conpressor as possible.
Features
1)adaptive to CFC ,HCFC ,HFC refrigerants
2.A variety of shape design ,the same volume of diffen=rent aspect ratio cases,user friendly selection and installation
3.In order to facilitate welding ,ODF adoption ,ODF adoptaion of TP2 copper reserve
4.Maximum working pressure:3.1Mpa
Other photos
KL-205 Suction Accumulator