Welcome to ECVERY
NTP time server
NTP time server
Supplier Info
[China Supplier]
Contact Person : Mr. Yi Lei
Tel : 86-21-36531186
Fax : 86-21-36531185
Product Detail
1,Adopt RFC1119/1305 NTP protocol 2,10M/100M adaptive network interface 3,TOD/1PPS/10MHz output 4,Competitive price

GTT-100 network time server is the ptofessional networking equipment providing high-stability time source. GTT-100 network time server receives GPS satellite signals and extracts the timing information to adjust the server's local time. It distributes standard time under NTP protocol (Network Time Protocol). Upon the PC or server which need time synchronization services, it will run a client program to read the NTP protocol, derive time information, and modify the native machine time. The network time server can be widely used in telecommunications, finance, taxation, public security and other special networks as well as general corporate networks to unify the network time.

With the rapid development of modern society, higher demand on the time precision and frequency is put on the agenda. Nowadays with the development of modern digital communication networks and the information superhighway construction, the political, cultural, technological and social information coordination is based on a strict system of time synchronization, especially in the communications, electricity, financial securities, computer networks, production line operation, administration and national defense and other fields urgently need the time synchronization equipment.

Global Positioning Satellite (GPS) signals act as the reference source of  GTT-100 network time server. The time reference contained in the GPS satellite signals synchronizes with the universal time coordinated (UTC). The long-term frequency stability has achieved the10-13 level of magnitude of cesium atomic clock, which is equivalent to be only 1 second slower during 30 years. To adjust local time with this reference signal can eliminate the accumulation of deviation resulted from the low accuracy of local clock time and also can greatly improve the timing precision of the server. GTT-100 network time server use the professional GPS timing receiver. It can receive and lock the satellite signal fast and reliably.

NTP protocol (Network Time Protocol) is a common international network timing protocol. Its principle is through the client to launch a time polling to the server after an interval of time. According to a certain filtering algorithm it can calculate the time deviation between the server and the client as well as the propagation delay caused by network transmission. Then according to these two parameters to adjust the client's local time and make it consistent with the server. Compared to other time calibration prorocols, NTP protocol can  eliminate the impact caused by network transmission delay, so it can provide high-precision timing services. Detailed description can be referred to the latest protocol standards documents RFC1305 and RFC2030. GTT-100 network time server can be compatible with NTP v2 / v3 / v4 in various versions.

GTT-100 network time server consists of the outdoor part and interior part. The outdoor part is composed of the GPS satellite receiving antenna, surge arrester and antenna amplifier (optional).  The function is to complete the reception of satellite signals.

NTP time server

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.