*DVB-S with CA MPEG2 *Chipset:250 MHz IBM PowerPC Processor (350 Mips) *1 x Smartcard-Reader *Channel-change time < 1 second

Feature: 1) 250 MHz IBM PowerPC Processor (350 Mips) 2) Linux operating system 3) 1 card reader 4) MPEG2 hardware decompression 5) DVB-S, DVB-C 6) V. 24/RS232 interface 7) 100Mbit Ethernet interface two-way 8) 2 LED instructions 9) Unlimited number of TV / radio channel list 10) Channel switching time less than 1 second 11) Full automatic service scan 12) EPG (Electronic Program Guide) 13) Support for DiSEqC 14) Multi-lingual 15) The number of bit-stream output SPDI / F interface (AC-3 / DTS) 16) 1 European Scart plug (software control) Technical parameters: *IF input: 950-2150 MHz *Signal Level - 65 dBm...- 25 dBm *Signal-to-Noise 12 dB maximum. *Mother of the first socket F *75 ohm input impedance *AFC + / - 3 MHz *QPSK *The scope of input symbol rate 2...45 M, SCPC / MCPC *Forward error correction 1 / 2, 2 / 3, 3 / 4, 5 / 6, 7 / 8, automatic *Video decoder: MPEG-2 and MPEG-1 compatible PAL G / 25 Hz standard Video proportion of 4: 3 / 16: 9 (automatic) *Audio decoder: MPEG-1 & MPEG-2 Layer I and II Stereo Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz *Analog output: Output Level L / R 0, 5 Vss 600 ohm THD> 60 dB (1 KHz) Isolation <-65 dB *Digital output Output Level 0, 5 Vss 75 ohm Sampling digital filter 32 KHz, 44.1 KHz, 48 KHz S/PDIF- optical output (AC3) *Video parameters: Input FBAS 1 Vss + / - 0.3 dB on 75 Ohm Teletext filter: ETS 300 472 standard *European Scart plug: Output: FBAS, RGB, S-VHS *RS232 interface: Bitrate 115, 2 kBit / s maximum. Pin SUB-D-9 Firmware upgrade *Ethernet port I firmware upgrade network *LNB power and polarisation: LNB Current 500mA maximum. Short-circuit protection Vertical polarization LNB voltage <14V without load, > 11.5V (400mA) Horizontal polarization LNB voltage <20V without load, > 17, 3 V (400mA) LNB power-down standby *Receive control DiSEqC 1.0/1.2 SAT location / SAT Select DiSEqC - motor control Power consumption: <10W / 12V Input voltage: DC12V, AC + / - 15% *External power supply: Input: 110-240V AC / 50-60Hz / 0, 6 A Output: 12V = / 1A *Physical Specification: Temperature of +15 ° C...+35 ° C Humidity <80% Dimensions (W x D x H): 195 mm x 130 mm x 40 mm Weight: 0.6 kg

 

Feature:

* 250 MHz IBM PowerPC Processor (350 Mips)* 2 LED status* Linux Operating System* Full automatic service scan* Supports directly bouquet-lists (indirect unlimited)* Supports multiple LNB-Switching control (supports DiSEqC)* 1 x Smartcard-Reader* Unlimited channel lists for TV/Radio* SPDI/F interface for digital bit stream out (AC-3 / DTS)* MPEG2 Hardware decoding* Channel-change time < 1 second* Fully adaptable OSD in many languages (skin-support)* 100Mbit full duplex Ethernet Interface* Supports EPG (electronic program guide)* 1 x Scart-interfaces (fully controlled by software)

satellite receiver 500S