lins 5 infusion pump,Find lins 5 infusion pump Manufacturers, Suppliers on ECVERY.com

LINS-5 Infusion Pump

Feb 04, 2012

Infusion Pump LINS-5 Infusion Pump Infusion PumpLINS-5 Infusion Pump 1. Work condition1.1 Ambient temperature: +5°C ---- +40°C1.2 Relative humidity: ≤80%RH1.3 Power ... Rate Options: 1ml/h~999ml/h, in 1ml/h increment2.5 Infusion Total Amount Setting: 1ml~9999ml, in 1ml increment2.6 Occlusion ... open), power display, occlusion pressure adjustment, flow rate level adjustment LINS-5 Infusion Pump

Supplier: Nanjing Healicom Medical Equipment Co., Limited [China Manufacturers]

ZNB-XD with CE Mark Infusion Pump

Jul 23, 2012

... 700 ml/hTechnical Specifications: ModelZNB-XD Infusion Pump with CE MarkPumping MechanismCurvilinear peristalticIV SetsCompatible with ... .5 kgsSafety ClassificationClass I, type CFWe focus on medical pumps:1. Infusion Pump (Volumetric Pump, IV Pump) ... 2. Syringe Pump3. Enteral Feeding Pump4. Irrigation Pump5. Infusion Management SystemInnovative Infusion ...

Supplier: Beijing KellyMed Co., Ltd. [China Manufacturers]

High precision Syringe Pump & Infusion Pump

Oct 17, 2012

... needs 8-14 hours), last for over 5 hours operationAutomatic battery charge when transfusion pump connected with AC power supply and turned ... humidity: 80% or belowTemperature: 5°C~+40°C,Air pressure: (86~106) kPa,Relative humidity: 80% or below High precision Syringe Pump & Infusion Pump

Supplier: Shenzhen Lifotronic Technology Co., Ltd. [China Manufacturers]

Multi-channels infusion pump system

Jun 10, 2012

... used, Easy&safe usage, space saving INFUSTATION UNICARE (Rack pump system )Integrate infusion and syringe pumps into one system :Safe: power supplied ... , save space greatly (4/5/6/7 pumps for option)Multi-functional: with infusion pothook, support different infusion equipments at the same time ... capable for 8 pumps 1690mm*530mm*550mm 21kg Multi-channels infusion pump system

Supplier: Sino Medical-Device Technology Co., Ltd. [China Manufacturers]

Micro Infusion pump with large LCD

Sep 05, 2012

... %,≤25d/min(300ml/h); ±5%,>25d/min(300ml/h)Dedicated line: ±5% Standard line: ±8%Preset total infusion volume1-9999mlOcculusive SensitivityAdjustableKVO rateFlow≤10ml ... charging 6 hoursWhen battery fully charged,pump can continuously work about 3 hours at an infusion rate of 100mlNet weightAbout 2kgAbout 2 ... all of liquid medicine, mini infusions and rapid infusions Micro Infusion pump with large LCD

Supplier: Longfian Scitech Co., Ltd. [China Manufacturers]

Infusion Pump

Sep 02, 2012

... ;4. 8 hours build-in battery life in high capacity;5. Special light for night operation;6. Three levels of occlusion ... anti- sticking design of the drop detector;11. Bolus function. Infusion Pump

Supplier: Shenzhen Biocare Electronics Co., Ltd. [China Manufacturers]

intelligent 600I Infusion Pump

Aug 06, 2012

... *140*190 mm-length* width* heightMax. weight:2.5 kgClassification: Type B.Outer shell material: ABS plasticoperating condition ... : Environment Environment temperature:+5- +40,atmosphere pressure 50-106kPa,related humidity 30%- ... infusion pipe use "double dove" to testEMC: Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24 intelligent 600I Infusion Pump ...

Supplier: Seeuco Electronics Technology Co., Ltd. [China Manufacturers]

Infusion pump with CE certificate

Sep 23, 2012

... precisely detect tube air bubbles.Technical parameters of BYS-820 infusion pump: Unique Human Voice Alarm systemThe device triggered the human ... :1ml~9999mlTotal Infusion Volume:0.1ml~9999.9mlKVO rate:1ml/h~5 ml/h (1ml/h step)Occlusion:High: 800mmHg ±200mmHg ... /250V, 2 pc insidePower Consumption:30VAOperating Condition:Ambient temperature: +5°C~+40°C;Relative humidity: 20~90%Atmospheric pressure: 86 ...

Supplier: Xi'an Landcom Digital Medical Science & Technology Co., Ltd. [China Manufacturers]

Sanitary infusion Pump

Feb 28, 2012

... :mechanical sealApply for every kinds of stainless steel pipelineSanitary infusion pump is applicable for transporting various liguids such as milk, ... industriesModelFlow(Ton/h)Delivery liftMotor powerInlet/outlet diametersRemarksWXH-1.5-141.5140.5538/25ABB motorWXH-3-143141.138/38ABB ... motorWXH-5-245241.550/38ABB motorWXH-5-305302.250/38ABB motorWXH-10-2410242.250 ...

Supplier: Zhejiang Wenxiong Machine Valve Co., Ltd. [China Manufacturers]

Infusion Pump TR5860

Aug 18, 2012

TR5860 Infusion Pump 1.Infusion rate range:1-600ml/h 2.Fast infusion volume:1.0ml(Fast infusion speed:600ml/h) TR5860Infusion Pump1. Unique door-free design, avoid the problem of pump stuck and fluid leakage.2. Compatible for all standard IV sets.3. Rate :1~600ml/h 4. KVO: 1ml/h 5. Big LCD indicator6. Various alarm function. 7. Bolus: 600ml/h Infusion Pump TR5860

Supplier: TRIUP International Corp. [China Manufacturers]

Remote Control Multi-functional infusion pump (MAOIP-900)

Sep 12, 2012

... set of any brand is suitable for this pump status Remote Control Multi-functional infusion pump (MAOIP-900)(1)Large LCD display, with ... alarms(4)Purge, KVO function (10)Alarm: Infusion Complete, Empty, Faulty Signal,Misoperation,Occlusion,(5)Heating function is optional, suitable for infusing ... Remote Controller makes operating more convenient. Remote Control Multi-functional infusion pump (MAOIP-900)

Supplier: Guangzhou Maya Equipment Co., Ltd. [China Manufacturers]

Infusion Pump

Jun 05, 2012

... mL / h (minimum stepping 0.1 mL) Rate Accuracy: ± 5% error Total infusion volume (Σ inf.): 0.1 - 9999 mL (minimum stepping 0 ... stalls set)End warning time of infusion: 1 - 30 min (can be set) Working conditionsAmbient temperature: +5 - +40 Relative humidity: 20% - 90 ... (rechargeable batteries) Ni-MH 12 V 1500mAh Battery life: 2.5 h @ 25 ml / h Battery charging time: 6 h Infusion Pump

Supplier: Beijing Hongrunda Sci-Tech Development Co., Ltd. [China Manufacturers]

Infusion Pump

Oct 09, 2012

... RATE,2. VOL.LIMIT,3. ∑(accumulated infusion volume),4. Battery capacity,5. Battery charge indicator,6. AC power ... ,2. OCCL,3. Low battery,4. Installation error,5. AIR,6. EMPTY,7. Machine malfunctionElectrical safetyIn accord ... infusion volume1~9999mlBatteryRechargeable lithium battery, 7.4V, 1400mAStorageenvironment temperature -15~50ºC,air pressure 70~106 kPa, relative humidity 30%~90% Infusion Pump ...

Supplier: Shanghai All-Time Commercial Co., Ltd. [China Manufacturers]

Large LED display Infusion Pump

Nov 20, 2012

... applicable to the common infusion sets at φ3.8mm±0.2mm, δ<0.5mm.Caution Please refer to 5.6, 9.2 ... and 9.11 to ensure the infusing accuracy.1.5 AC/DCThis equipment uses built-in rechargeable Nickel Metal ... Occlusion Sensitivity Optional choose from higher to lower. Refer to 5.7.KVO 1-5ml/h (Adjustable,refer to Appendix C ... power supply inside, BF type common equipment Large LED display Infusion Pump

Supplier: Beijing Health Care Resource International Co., Ltd. [China Manufacturers]

Medical syringe infusion pump BYZ-810T

Feb 28, 2012

... LCD screen BYZ-810T syringe infusion pump Features & Functions:1. Multi-channel(Double channels) syringe pump.1.Three working modes: ... working status.5.KVO and Bolus functions.Product nameBYZ-810T syringe infusion pumpModelBYZ-810T syringe infusion pumpFlow rate50ml ... the battery charged for 10 hours.Operating environmenttemperature:+5~+40°C, relative humidity:20~90%Storing environmenttemperature ...

Supplier: Changsha Beyond Medical Devices Co., Ltd. [China Manufacturers]

Medical Infusion Pump IP300

Oct 20, 2012

... should be over 65dB (A) during alarms. Battery Capability: Infusion Pump can work under intermittent rate (25ml/h) longer than 4 ... specificationDimensions: 240mm(H)×110mm(W)×230mm(D) Weight: ≤3.5 kg (packaging-free) Screen: Large multi color LCD Environment ... requirementsTemperature Operation: +5°C~+40°C (special), +15°C ~+40°C (standard) ...

Supplier: Beijing Eternity Electronics Technology Co., Ltd. [China Manufacturers]

Infusion Pump(MR-508B)

Aug 15, 2012

... devices 2.Software with the capacity of setting 3.storing10 infusion apparatus parameters 4.LCD 1. The only enterprise with the ... , infusion time amount.4. Keypad with number and letter keys; ATM mode: simple and well performed5. Accuracy rate 1~1500ml: ±5%, 1501 ... pressure value:0~25 spans, easy-to-adjust for clinic Infusion Pump(MR-508B)

Supplier: Xi'an Yima Opto-Electrical Technology Co., Ltd. [China Manufacturers]

IV infusion pump/volumetric infusion pump

Apr 11, 2012

1.infusion pump 2.CE quality Electric infusion Pump and the best prices 3.volumetric infusion pump 4.type:infusion pump Four kinds of modes infusion pump/volumetric infusion pump Functions and Features ... and more reliable. 4. Widely application scope of infusion rate, 1ml/h ~2000ml/h. 5. Drop Counter inspection and automatic control, automatic ...

Supplier: Jiangmen Chaoyang Medical Hardware Industry Co., Ltd. [China Manufacturers]

disposable infusion pump

Nov 07, 2012

... .dynamically display pressure value 5.Up to 20 IV sets can be added The Features of Dual Mode Infusion Pump HL-X801E1. Two ... in different environments.12. CE certified.The Specifications of Infusion Pump HL-X801E Infusion ModeDrip-rate and volumetricPumping MechanismPeristaltic finger pumpOptional Infuse Rate ...

Supplier: Shenzhen Hlongmed Biotech Co., Ltd. [China Manufacturers]

Infusion Pump For Vet With CE

Aug 08, 2012

... With CE *drop automatic control Computerized Infusion Syringe *alarm infusion pump *CE Infusion Pump For Vet With CEControl mode: drop several detection and automatic ... : temperature 5 ~ 40 °C relative humidity 20 ~ 90%Transportation and storage environment: temperature - 10 ~ 55 °C relative humidity 10 ~ 90% Infusion Pump For ...

Supplier: Shenzhen Xingshengshi Technology Co., Ltd. [China Manufacturers]