olive oil-grade silicone rubber compound
SH-3XXA/B series
Introduction
The product is A / B two component and translucent silicone rubber,vulcanized by the Platinum and rhodium complexes, without the addition of the curing agent during the production.Apply to the processing of food-grade molded products, and FDA, LFGB certificated
Feature
Operation easy: without the addition of the curing agent during the production
Eco-friendly: no unpleasant odor and harmful gases
Low temperature: fast curing at 120°C--140°C/80—120s
Energy save: above 30% saved compare with the HTV style.
High efficiency: the workshop efficience promote 30% at least relative to the HTV style.
Stable: Less low molecular weight and more stable size
Application
Tableware / medical products / auto parts / industrial products
How to use
1. Use Ratio: A :B=1:1
2.Cleaning the mixer and milling the rubber in proportion by the twin-roll mixer until the edge of the rubber is not split
3.Molding operation——thin-passing the uniformly mixed rubber materials and cut it into suitable size,then,start molding process.
4.Curing conditions: the actual mold temperature of 125 ° C / 80 seconds (glue thickness 2mm);Recommended temperature of the upper and lower mold: 138 ° C ( the temperature of the instrument)
Storage
Store this product in cool, dry and ventilated conditions.
The temperature should below 30°C
Store the part A and part B separately.
Shelf-life
12 months under above conditions,it remain can be used after shelf life if the technical data is qualified.
Note
Application
1. Mix the rubber compound homogeneous,if the idle time is too long,remill it by twin-roll for reuse, but the experimental verification is a precondition.
2. Separately the A/B part with the curing agent such like DHBP
3. Safety using temperature:below 65(include the milling temperature)
4. Security deposit time:within 5days.
Safe
1. Pay attention to the labor wearing during the products application; avoid burns in the construction process. Prohibit eating
2. Use the product carefully, pay attention to the safety issues before or during the process.moreover, and follow the relevant provisions of national or local government safety regulations. (Refer to the appropriate safety guidelines for details in MSDS)
FDA,LFGB--silicone gum