knuckle bearing Model: GE a unit of 2 rings, out ring and inner ring. The outer ring is divided into two axial halves both ma

knuckle bearing

knuckle bearing  is a unit of 2 rings, out ring and inner ring. The outer ring is divided into two axial halves both made by #45 Steel with hardness up to HRC 40-45 and also the whole surface will be burnished ( in case of under special application. ). The inside surfance of outer ring is plated hardened chrome. The inner ring is made from a metal basis which may be Bronze or high strength brass, Embedded with solid lubricant on it's outside surface.

Base material : Bronze

Max Dymatic load: 80 N/mm2

Friction Coef (dry) : 0.10-0.16

Friction Coef (oil) : 0.07-0.09

Temperature limit: -100oC→ +250oC

knuckle bearing