Welcome to ECVERY
High sensitivity optic smoke alarm detector with home security
High sensitivity optic smoke alarm detector with home security
Supplier Info
[China Supplier]
Contact Person : Ms. zhang Jessicai
Tel : 86-755-22306500
Fax : 0755-22306601
Product Detail
1.Sensitivity to smoke. 2. Stable and Durable 3. Restore automatically. 4.2 years warranty. 5.CE,ROHS,EN14604.

Key features include:

1.Smart Technology:   Designed to help reduce unwanted or nuisance alarms.

2.Single Button Test :  Pushing the button to test the alarm

3.Dust Cover  is included to keep the alarm clean during construction.

4.Easy Installation/Maintenance features include two screws for easy access to install smoke alarm on the ceiling.

5.Improved UV Resistance keeps the alarm from discoloring over time.

Function:

1. Photoelectric technology is generally more steady than ionization technology at detecting large particles, which tend to be produced in greater quantity by smoldering fires, which may smolder for hours before bursting into flame. Sources of these fires may include cigarettes.

2. The unit monitors the air, and when smoke reaches its sensing chamber, it alarms. It can give you more time to escape before fire spreads. This unit can only give an early warning of developing fires if it is installed, maintained and located where smoke can reach it, and where all residents can hear it, as described in this manual. This unit will not sense gas, heat, or flame. It cannot prevent or extinguish fires.

3. The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. 4.This sequence tests the units electronics, battery and horn to ensure proper operation.

5.The unit shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. In a smoke incident, the horn will sound in the repetitive manner—three beeps , a pause, three beeps , a pause .

6.The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds for a minimum of seven days.

7.The alarm will utilize a red LED that shall flash once every 30-40 seconds to indicate the alarm is receiving power.

Wide ApplicabilityApplies widely to works, banks, stores, warehouses, offices and homestead  etc. 

Technical Parameter:

Main unitParameter
Operating VoltageDC 9V Battery
Static Current≤10μA
Alarm Current≤12mA
Audio Alarm ≥85dB(3m)
Temp Range-10°C-+60°C
Humidity Range≤95%RH

Low Battery Alert Remain

7-15 days

High sensitivity optic smoke alarm detector with home security

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.