33W/7.5V Thin film flexible amorphous silicon solar module
Type | PVL29 5L | PVL31 5L | PVL33 5L | ||
Maximum Power | Pmax | (W) | 29 | 31 | 33 |
Voltage at Pmax | Vmp | (V) | 7.5 | 7.5 | 7.5 |
Current at Pmax | Imp | (A) | 3.88 | 4.1 | 4.36 |
Short-circuit Current | Isc | (A) | 4.8 | 5.1 | 5.3 |
Open-circuit Voltage | Voc | (V) | 10.5 | 10.5 | 10.5 |
Maximum Power | Pmax | (W) | 23 | 24 | 25 |
Voltage at Pmax | Vmp | (V) | 7 | 7 | 7 |
Current at Pmax | Imp | (A) | 3.24 | 3.42 | 3.6 |
Short-circuit Current | Isc | (A) | 3.9 | 4.1 | 4.3 |
Open-circuit Voltage | Voc | (V) | 9.6 | 9.6 | 9.6 |
Length | mm | 1410 | 1410 | 1410 | |
Width | mm | 394 | 394 | 394 | |
Area | A | m² | 0.56 | 0.56 | 0.56 |
Power density unit area | ρp-A | W/m² | 52.20 | 55.80 | 59.40 |
Weight | W | Kg | 1.9 | 1.9 | 1.9 |
Power density unit weight | ρp-w | W/Kg | 15.26 | 16.32 | 17.37 |
Cell Area (356×239) | Acell | m² | 0.4254 | 0.4254 | 0.4254 |
Available Area (336×239) | AAA | m² | 0.4015 | 0.4015 | 0.4015 |
Available Area Efficiency | ηAAE | % | 7.22% | 7.72% | 8.22% |
Module Efficiency | ηmodul | % | 5.2% | 5.6% | 5.9% |
Advantages:
1. Flexible.
V-laminates offer freedom of design to architects as they can even conform to curved surfaces and hence are meeting the increasing demand for aesthetically pleasing building integrated PV (BIPV)
2. Lightweight.
Lightweight PV laminates are particularly suited for retrofitting of existing buildings or applications, where additional weight and/or wind load are critical to the statics of a building or structure
3. No-Glass.
No Glass PV-laminates in ground-mounted PV installations reduce sub-construction requirements and total system costs substantially.
4. Durable.
Durable PV-products encapsulated in UV stabilized, weatherresistant polymers have proven themselves over decades under the most extreme conditions imaginable, including satellites, ocean buoys and military applications
5. Shadow Tolerant.
Shadow tolerant PV products offer higher outdoor performance in low and diffuse light conditions due to higher absorption of light in the blue wavelength range. The thin film PV Solar Panels can deliver power even when partially shaded or soiled
6. High Temperature Performance.
Thin Film Flexible PV products render better energy yield at high module temperatures and in warm climates. Under real outdoor conditions, module temperature can be up to 80 celsius degree, especially if they are building integrated and directly in the sun.
At these temperatures, the thin film PV-products can yield up to 20 % more electricity compared to conventional crystalline solar modules of the same power rating.
7. More KWh-higher ROI.
Thin film flexible PV products achieve higher kWh energy output per Wp installed than most
conventional crystalline products. Make the most out of your photovoltaic investment.
33W/7.5V Thin film flexible amorphous silicon solar module