Heat Pipe Solar Collector has high heating efficiency because the heat is transferred by a copper pipe inside the vacuum tubes.

Heat Pipe Solar Collector uses heat pipe collector to supply hot water. This product can work under certain pressure and supply water to a high and far place.

Feature:

1. Can be matched with any low pressure, high pressure hot water system.2. Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer.3. Easy plug-in design and installation.4. Corrosion-resist Aluminum manifold and frame.5. Optional 38°/45°frame can resists wind with a velocity of 36m/s.6.Can supply hot water to large amount water need.7. Economical for hotel, school, dormitory, hospital and tall high-buildings.

Specification:

Inner manifold material	Red copper channel
Outer shell material of manifold	Aluminium alloy
Frame material	Aluminium alloy
Heat pipe material	99.93% pure cooper & lead free, 45% silver brazing
Rubber Seals and rubber Rings	HTV grade silicone rubber
Optional installation angle	0°,30°,38°,45°
Maximum Operating Pressure	12 bar
Optional flow rate	0.1L/min/tube 0.026G/min/tube
Vacuum tube	Ø47-1500mm, Ø58-1800mm with heat pipe
Daily efficiency	≥55% (≥42% in winter)
Hailstone resistance	Dia≤25mm
Heat pipe anti-freezing	≥-35
Life span	Approximate to 15 years

PACKAGING:

1.Container :standard carton packaging

2.Sample: special wooden case

Heat Pipe Solar Collector