Welcome to ECVERY
Pressurized Solar Collector With Heat Pipe
Pressurized Solar Collector With Heat Pipe
Supplier Info
[China Supplier]
Contact Person : Mr. Wang Adam
Tel : 86-573-87863789
Fax : 86-573-87863789
Product Detail
Solar Collector 1)For 15 years warranty 2)2% FREE SPARE PARTS 3)Sample offer 4)OEM service

Working principle Of Pressurized Solar Collector:   

1) The operation of the solar collector is very simple. 2) Solar absorption: solar radiation is absorbed by the solar tubes and converted into heat. 3) Solar heat transfer: heat pipes conduct the heat from within the solar tube up to the header pipe 4) Solar energy storage: water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header, the temperatures is raised by 5-10 C. Throughout the day, the water in the tank is gradually heated

  

Specifications

1. Manifold (interior) material: red copper

2. Manifold (exterior) material: aluminum alloy

3. Tube dimensions: 58 x 1.800 mm / 47 x 1.500 mm

4. Vacuum tube coating material: AL-N-AL or AIN-SS-Cu

5. Insulation layer:  rock wool

6. Pressure bearing: 6Bar=0.6MPa

7. Hail resistance: 25mm

8. The standards of vacuum tubes with heat pipe: 14, 16, 18, 20, 24, 30 tubes .

9.Water capacity: 150L, 200L, 250L, 300L, 500L 10.Daily efficiency: >= 55%(>=42% in winter) 11. Heat preservation: 72h to 80h 12. Electric heater: 1.5Kw to 3Kw

Split pressurized Vacuum Solar Collector Features:1. The upright tank can make the water temperature to a high level. It can hot the water instantly. 2. The tank inside the building, the hot water loses less energy than the normal one 3. The pressurized solar water heater collector and the water tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around 4. Back up with electric heater so that in the day without sunshine hot water can also be used5. Can be combined with gas or electric heater 6. Max. Pressure: 12bar; Operating Pressure: 6 bar7. It can be used for other function, such as warming

Warranty :  5 years' International responsibility for free repairing or exchange due to original quality problem      Remark :      a) We offer  2% vacuum tubes for free for exchange in case several shattered vacuum tubes during transit      b) About the following accessories, if you need, we can offer it to you,  But should charge it.

  

Model

Ligthing(m2)

Heat pipe

Supply hotwater(L/D)

20/40" container

diameter

length

No.

OS-SP47/12

1.26

Ø47mm

1500mm

12

70

233/566

OS-SP 47/18

1.80

18

110

164/400

OS-SP 47/20

2.10

20

125

130/380

OS-SP 47/30

3.15

30

180

103/251

OS-SP 58/12

1.73

Ø58mm

1800mm

12

110

127/309

OS-SP 58/18

2.57

18

150

100/242

OS-SP 58/20

2.88

20

175

90/230

OS-SP 58/30

4.32

30

260

68/165

 Product Show:

Pressurized Solar Collector With Heat Pipe

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.