Split pressurized solar hot water heater
split pressurized solar Collector:
The split pressurized solar hot water heater is composed of heat pipe solar collector, storage tank, solar working station and installation parts.
split pressurized solar Collector Working Principle:
* When the discrepant temperature of the solar collector and water tank reaches or not reaches the set value, the controller shall start or shut the circulation pump automatically.* The circulation pump makes heat-conducting liquid (The heat-conducting liquid transfers heat to water by heat exchanger in the water tank) circulate automatically.* In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device.
Split Pressurized CE Solar Water Heate
split pressurized solar Collector Features:1) Collector separates with the storage tank. The tank can be put anywhere of the house.2) The collector can be put on both tilted roof and flat roof.3) Module design harmony with the building perfectly.4) Intelligent control and automatic operation.5) Anti-freeze: no water inside the tubes when it works.6) The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.7) Multifunction: Bathing, washing, domestic heating.8) CE, ISO9001certificateOuter packing: Export CartonThe above specifications are only for reference, the system specifications will be designed according to the natural resources and the actual needs of the customer.If you are interested in our products, please feel free to contact us at any time.
Split Pressurized Solar Collector MODEL:
OER58A Solar Water Heater | |||||
Model | Aperture area(M2) | Capacity(L) | Vacuum tube NO. | QTY in 20ft | |
OER58A16 | 2.08 | 160 | 16PCS | 99 | |
OER58A20 | 2.6 | 200 | 20PCS | 91 | |
OER58A30 | 3.9 | 300 | 30PCS | 63 | |
Description | |||||
Tube: | 58*1800mm super heat conduction metal vacuum tube | ||||
Inner manifold material: | Red copper | ||||
Insulation: | Imported Polyurethane total forming with pressure and best density 40kgs/M3 | ||||
Outer sheet: | Aluminum Alloy | ||||
Test pressure: | 1.2Mpa | ||||
Working pressure: | 0.6Mpa | ||||
Frame: | Aluminum galvanized steel sheet folded from mould with power painting | ||||
Optional parts: | electric heater, Micro controller | ||||
Available Capacity: | 100-500L |
Split Pressurized Solar Collector Picture Show:
Split pressurized solar hot water heater