Solar water heating system pressured
What is Flat Plate pressure solar collector ?
Solar pressure solar collector is a key component of solar water heater and solar hot water system. Flat Plate Solar Collector is one main type of solar collectors. A flat plate solar collector consists of an absorber, a transparent cover, a frame, and insulation. Usually a low-iron solar safety glass is used as a transparent cover, as it transmits a great amount of the short-wave light spectrum. Simultaneously, only very little of the heat emitted by the absorber escapes the cover (greenhouse effect). In addition, the transparent cover prevents wind and breezes from carrying the collected heat away (convection). Together with the frame, the cover protects the absorber from adverse weather conditions. Typical frame materials include aluminum and galvanized steel; sometimes fiberglass-reinforced plastic is used. The insulation on the back of the absorber and on the side walls lessens the heat loss through conduction. Insulation is usually of polyurethane foam or mineral wool, though sometimes mineral fiber insulating materials like glass wool, rock wool, glass fiber or fiberglass are used. Flat plate solar collectors demonstrate a good price-performance ratio, as well as a broad range of mounting possibilities (on the roof, in the roof itself, or unattached).
Technical Parameter of Flat Plate pressurized solar collector | |
Type | P1-1-B-L |
Gross area(m²) | 2 |
Efficiency area(m²) | 1.82 |
Gross weight (kg) | 30±3 |
Thermal efficiency(ηa0) | 0.79 |
Stagnate temperature | 180°C |
Max.working pressure | 1.4Mpa |
circulation flow | Water or propylene glycol |
Transparent cover | |
Number of cover (pc) | 1 |
Dimension LxW (mm) | 1980x980 |
Cover material | Low-iron tempered Glass |
Cover thickness (mm) | 4 |
Absorber | |
Bitmap Dimension LxW (mm) | 1886x956 |
Material | Copper |
Surface treatment | Black Chrome Coating |
Construction type | Fin and Tube, ultrasonic welding |
Header material | Copper Tp2 |
Header tube size (mm) | Ø22x1060 2 pcs (optional:Ø25mm) |
Riser material | Copper Tp2 |
Riser tube size (mm) | Ø 8x1886 8pcs (optional:Ø10mm) |
Fill capacity | 2.1L Including Header Pipes |
Thermal insulation | |
Insulation material | 16K Fiber glass insulation (back) (Optional 60K Rock wool) |
Polyurethane (side) | |
Insulation thickness | 30mm (back) |
25mm side | |
Conductivity(W/mK) | 0.042 under 75°C |
Casing | |
Frame | Aluminum alloy |
Frame Color | Brown or aluminum |
Back Plate | 0.5mm Galvanized Steel |
Product Size(LxWxH) (mm) | 2000×1000×80;NW:30kg |
Carton Package Size(LxWxH) (mm) | 2070x1070x102; 0.23CBM;GW:35KG |
Woonden package Size(LxWxH) (mm) | 2040*1090*280; 0.62CBM;60kg |
20ft container | 140 PCS |
40ft H container | 340 PCS |
The Structure of Flat Plate pressurized solar collector
The International Certificates of Flat Plate pressurized solar collector
Main Manufacturing Process of pressurized pressurized solar collector
Domestic or Commercial Application of pressurized solar collector
pressure solar collector