20A PWM Solar Power Panel Charger Controller Regulator Auto 12V/ 24V
- Proven reliability
- Precise lighting controller
- PWM battery charging
- Microcontroller digital accuracy
- Fully automatic operation
- 16 field adjustable lighting control options
- Manual test capability
- Detects day and night using the PV array
- Suitable for all 12V /24V lamps
- Suitable for Seal lead acid battery
- Temperature compensation
- Voltage: 12V/24V Auto Switch
- Charge current: 20A
Load current: 20A
- 25% current overload: 1 min.
- Load disconnect: 11.1V or 22.2V (depending on 12V or 24V voltage)
- Load reconnect: 12.6V or 25.20V (depending on 12V or 24V voltage)
- Equalization voltage (10 mins): 14.6V or 29.2V (depending on 12V or 24V voltage)
- Boost voltage (10 mins): 14.4V or 28.2V (depending on 12V or 24V voltage)
- Float voltage: 13.6V or 27.2V (depending on 12V or 24V voltage)
- Temperature compensation (mV/C): -30mV or -60mV (depending on 12V or 24V voltage)
- Operating temperature: -35 ~ +55C
- Dimensions: 140 x 95 x 32mm
- Maximum support 480Watt
- Digital LED display shows the 16 lighting options (by switch with 5 seconds)
- Number display, from 0 to 7, DC output.
- Number display, from 0. to 7. 1Hz output.
- Digital LED stop flash to confirm correct switch selection.
- 10 minutes delay to make sure its real dark.
20A PWM Solar Power Panel Charger Controller Regulator Auto 12V/ 24V