solar panel charge controller 1.JUTA MPPT controller 2.Increase efficiency by 10%~30% 3.10A 15A 20A 30A controller

Feature: The most important feature of this controller is intelligent tracking input voltage from solar panel, which could let solar panel always working at Maximum Power Point of V-A curve. Compared with normal solar charge controller, this MPPT controller could increase 10%-30%electrical power using efficiency from solar panel.

Function: This MPPT controller is not only have above mentioned special function, at the same time including completely .

 

Protecting and Controlling functions: 

Overcharge protection

Overdischarge protection

Battery Reverse Current Protection

Overloading Protection

Short Circuit Protection

Reverse Polarity Connection Protection

 

Attention:

1.      Please check the rated voltage of the solar panel, battery, load are all the same with 12V or 24V or 48V.

2.      Please pay attention to connection, do not connect the “+” “-” poles of solar panels wrong.( Wrong connection will be burn your MPPT controller)

3.      Battery must be connected earlier than solar panels and load. When take off the system, Solar Panels must be take down first, then cut off battery.

4.      The rated current of solar panel and load must be less than MPPT controller’s rated current.

MPPT-20 20A 12V or 24V solar charge controller