Ads by Google
solar controller ,solar charge controller ,price solar charge controller
10A-60A DC12V/24V/48V MPPT Solar charger controller Series is our new generation controller for off-grid solar system,
They are used in photovoltaic systems, coordinating the functions of photovoltaic panels, batteries and loads. The controller contains several protective functions, such that the entire system will operate efficiently and safely.
Features :
HPS-MPPT solar controller (also known as HOPESUN intelligent solar charge controller, solar charge controller, PV controller) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10%-30%. HOPESUN HPS-MPPT solar controllers 10A--60A include 12V series, 24V series.
Product features:
1.Applicable to various types of batteries,
2.MPPT function
3.Temperature sensor battery charging compensation
4.Overload protection (automatic restoration)
5.Overcharge protection
6.Short circuit protection (automatic restoration) ,
7.Lighting protection
Advantages :
MPPT advantage:
Maximum Power Point Tracking (MPPT in short) system allows PV panels to output more Power by adjusting working condition of the electrical module. In Figure1 A indicates that the working state of ordinary controller, that is PV battery working on 12V ,only outputting a power point of 53W (the general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputting the power point of 75W (the maximum power point).
Data sheet :
Model | HPS-MPPT60 40A | HPS-MPPT60 50A | HPS-MPPT60 60A |
Rated Voltage | 12V/24V/48V | ||
Max Load current | 40A | 50A | 60A |
Input voltage range | 12V~20V / 24V~40V / 48V~80V | ||
Length≤1m Charge loop drop | 0.25V | ||
Length≤1m Discharge loop drop | 0.05V | ||
Over voltage protection | 17V / 34V / 58V | ||
Full charge cut | 13.7V / 27.4V / 54.8V | ||
Low voltage cut | 10.5~11V / 21V~22V / 42V | ||
Temperature compensation | -3mv/°C / cell | ||
No load loss | ≤30mA | ||
Max wire area | 6mm2 | 6 mm2 | 6 mm2 |
Ambient temperature | -25°C---+55°C | ||
Mppt solar charge controller 48 volt 10a 15a 20a 30a 40a 50a 60a