Solar controller 1. CPU controlled structure 2. Rate solar power input 1KW 2. LCD display

solar controller

 

The solar charge controller is control device which can control solar panel and transform solar energy into electricity then store to the battery bank .It can not only supply normal power for the areas with poor or even without electricity, like in the mountains, pastoral, border, coastal island. But also can be used as DC power of the Mobile Communication Base. Solar charge controller is the most important part in off-grid system, whose performance has much effect on life expectancy and operation of the whole system, especially the battery expectancy. Life span of battery will be shortened by over charge or over discharge in any case.

 

Features:

 

1. Perfect protection function, thus the system has higher reliability.

2. Check all operation parameters from LCD display.

3. Voltage limiting and current-limiting charge mode, ensures battery in the best charging status.

4. PWM stepless unload mode, which burn the excess power, making the battery charging in best status.

 

Opitional functions:

Temperature compensation function.

RS communication function: RS232/RS485/RJ45/GPRS are optional communication ports.

 

Specification:

 

Model	LYD10-24	LYD10-48
Rated Solar Power	1kW
PV Charge Current	30A	15A
Rated Battery Voltage	24V	48V
Unload Voltage(factory default)	28V	56V
Control Mode	PWM
Display Mode	LCD
Display Parameters	PV Voltage,PV Charge Current, PV Power, Battery Voltage
Working Temperature & Humidity	-20~+50°C/35~85%RH(Without Condensation)
Temperature Compensation(optional)	4mV/°C/2V ,–35°C--+80°C , Precision: ±1°C
Communication Mode(optional)	RS232,RS485,RJ45,GPRS. Etc
Protection Function	Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection, Battery reverse connection protection, Lightning protection

1KW solar controller