Ads by Google
PV Solar Charge Controller MPPT design Solar Controller is a solar charge controller with Maximum Power Point Tracking. It is specially designed to work with all established module technologies and is optimized for solar systems with module voltages higher than the battery voltage. The Solarix MPPT is especially qualified in combination with grid tied solar modules. The advanced MPP-tracking algorithm from Steca assures that the maximum available power of the solar generator is charged to the batteries. TheFangpusun-MPPT with latest technology ensures full performance in all conditions, a professional battery care combined with modern design and excellent protection.
Product featuresMaximum Power Point Tracker (MPP tracker) Voltage and current regulation PWM control Current compensated load disconnection Automatic load reconnection Temperature compensation Monthly maintenance charge
Electronic protection functionsOvercharge protection Deep discharge protection Reverse polarity protection of load, module and battery Reverse polarity protection by internal fuse Automatic electronic fuse
Short circuit protection Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Overtemperature and overload protection Battery overvoltage shutdown
DisplaysMultifunction LED display
Multi-coloured LED 5 LEDs show operating states- for operation, state of charge, fault messages
OptionsNight light function pre-set in the factory or adjustable via Steca PA RC 100
Parameterisation of function values via Steca PA RC 100
Certificates
Compliant with European Standards (CE)
ROHS compliant
Made in china
MPPT | |
Characterisation of the operating performance | |
System voltage | 12V(24V) |
Nominal power | 250w(500w) |
Max. efficiency | ›98% |
Own consumption | 10mA |
DC input side | |
MPP voltage | 15v(30v) ‹Vmodule‹‹100v |
Open circuit voltage solar module | 17v…100v(24v…100v) |
Module current | 18A |
DC output side | |
Charge current | 20A |
Load current | 10A |
End of charge voltage | 13.9V(27.8V) |
Boost charge voltage | 14.4V(28.8V) |
Equalisation charge | 14.7v(29.4v) |
Reconnection voltage(LVR) | 12.5V(25V) |
Deep discharge protection(LVD) | 11.5V(23V) |
Operating conditions | |
Ambient temperature | -25 ºC…+40 ºC |
Fitting and construction | |
Terminal(fine/single wire) | 16mm²/25mm²-AWG6/4 |
Degree of protection | IP 32 |
Dimension(X x Y x Z) | 187153X68mm |
Weight | 900g |
PV Solarix MPPT 2010 Solar charge controller