Ads by Google
1.Applying with various types of batteries It is mainly suitable for Pb acid and gel batteries.
2.Automatic recognition of input voltage
3.Micro processing controller Pulse Modulation Wide-frequency(PWM)charge.
4.Temperature sensors for charging the battery in compensation
5.Setting the voltage of low voltage cut-off/resuming connection of the DC output of the load port
6.Protective circuit of PV from reverse-charging
7.CPU control and LCD display
8.Charge and low voltage LCD sets up
9. Display the capability of the battery SOC
10.Record, calculate and display the charged AH on the LCD screen.
11.Record,, calculate and display the discharged AH on the LCD screen.
12.Batteries stop and charge voltage HVD sets up
13.Batteries stop discharge SOC Sets up
14.Professional numeration of SOC
15.Loads turning on comeback setups.
16.Overload protection (automatic comeback)
17.Overcharge protection
18.Short circuit protection (automatic comeback)
19.Thunder protection
20.Reversed discharge protection
21.Conversed polarity connection protection (automatic comeback)
22. undervoltage protection
23..Programmable function It means that it can reset overcharge and over discharge parameter
Notice:
1.Be sure to connect correctly the positive and negative poles of the battery firstly ,the load, and lastly solar panel .Don’t reverse.
2.Please check the rated voltage of solar panels. batteries, and load before connecting, Make sure their rated voltage should be all 12V(or 24V, or 48V)
3.Pay more attention to “+” and “-“ poles of solar panels, batteries, controller and loads during the process of connection.
4.The rated current of solar panels and loads must be lower th
TECHNICAL INDEX:
Model | BM-C4860 45A | BM-C4860 60A |
Rated Voltage | 48V | |
Max Load current | 45A | 60A |
Input voltage range | 48V~80V | |
Length≤1m Charge loop drop | less than 0.25V | |
Length≤1m Discharge loop drop | less than 0.15V | |
Over voltage protection | 68V | |
Full charge cut | 54.8V (Default value, can be otherwise set) | |
Low voltage cut | 42V (Default value, can be otherwise set) | |
Automatic restoration low voltage cut | 50V (Default value, can be otherwise set) | |
Temperature compensation | -3mv/°C/cell | |
No load loss | less than or equal to 30mA | |
Max wire area | 6mm2 | |
Ambient temperature | -25°C——+55°C | |
Solar Charge Controller