PWM Control Charger Adjustable Loading Timer Adjustable Light On + Light Off Timer 12Vand 24V Battery Auto sensing PrefaceSolar Charge Controller is battery charger that can charge batteries by the power from the solar panels. The charge controller is intelligent for charging batteries, using MCU and professional software to control the step of charging, can prolong the batteries’ life.It has full self protection, protection of overload, short circuit, reverse connection, over charging and over discharging etc.This model controller is 12V/24 Battery Auto-Sensing.When the Battery is connected to the Charge controller, the controller will detect the voltage of the battery first, then it will decide how to charge the battery connected.ApplicationConnecting the solar panel to the solar panel terminals of the charger, “+” to “+” and “-“ to “-“.Connecting the battery to the battery terminals of the charger, ““+” to “+” and “-“ to “-“.Connecting the DC load to the load terminals of the charge, take care of the “+” and “-“ of the DC output.If the panel is charging the battery, the solar panel LED indicator will be on, and the battery volume LED indicator will display the volume of the battery with different color, from red to green.Press the power button, will control the DC output ON or Off.Pressing the power button for about 3 seconds, the figure LED will display “0”, then you release this button, it indicates that the charger enters the timer setup state, at this state, every press of the power button will make the digital change from “0” to “F”, every figure indicates the timer of the load, for example, if you change the digital as “3”, then the charge will switch on the DC output and will auto switch off the DC output in 3 hours. About all figures, see the table 1.Table 1, DC Output Time Setting

Solar charge controller