solar power inverter for Africa ISO9001,SGS certificate Model:AZX-60W to AZX-180W Output wave:Square wave Efficiency:80%

Specification:

The AZX power solar inverter adopt output bridge, power solar inverter producing 50Hz sine voltage and current signal. If the above switch conducts the below one, a positive voltage will be on loading between terminals, otherwise a negative voltage. In this case, only one switch can conduct at a certain time. One switch can be converted to PWM high frequency, the other one to below 50Hz low frequency. Due to the bootstrap circuit depends on the low-end devices, the low-end devices of power solar inverter are converted to the PWM high frequency, while the high end ones to the below 50Hz frequency. These switching devices will inherit reverse recovery current from all other devices when switch conducts, making it an ideal choice for quick recovering Super-junction devices such as 600V FCH47N60F. Therefore, the IGBT can reduce the total loss of the output bridge, so as to improve the overall efficiency of the power solar inverter.

Technical parameter:

Model	W-60	W-80	W-100	W-120	W-150	W-180
Input voltage	DC10-14V
Output power	60W	80W	100W	120W	150W	180W
Input current	0.2-15A
Self-consumption	≤1.5%
Output voltage	AC165-265V
Output wave	Modified sine wave
Output frequency	50-60Hz
Efficiency	76%
Measurement	178×154×96

Invert maintaining time(hour)≈Battery capacity(Ah)×battery voltage(V)×80%/Loading Power(W

DC to AC inverter